Shure PSM300 Twinpack Pro Monitoring System with SE215 Earphones - H20 Frequency
The Shure PSM300 Twin Pack Pro is a must-have for performers! It offers a top-notch monitoring solution for up to two people. Here's why you'll love it:
- • Durable metal build for long-lasting use
- • SE215 Sound Isolating earphones for precise stereo mixes on stage
- • Delivers detailed 24-bit digital audio and reliable wireless performance
With patented Audio Reference Companding, enjoy clear sound with minimal noise and no artifacts. The coverage range is over 300 ft (90 m) with no dropouts. Setup is a breeze with one-touch frequency scan and sync. Adjust volume easily with MixMode technology or stereo mode to create your personalized mix.
Features:
- PSM 300 Monitor System:
- Wirelessly send two channels of audio to onstage performers
- 24-bit digital audio for crystal-clear, detailed sound
- Patented Audio Reference Companding for a wired-like sound
- Up to 90 dB signal-to-noise ratio
- Exceptionally wide stereo separation
- Solid analog RF connection over a 300' (90m) range
- Create a personal mix with MixMode technology or stereo mode
- Frequency scan and IR sync quickly find and assign a clean channel
- Half-rack, single channel transmitter with included rack mount kit
- P3R body-pack systems available with SE112 or SE215 Sound Isolating Earphones
- P3T Wireless Transmitter:
- Single channel, half-rack transmitter with included rack mount kit
- Send a stereo or mono mix wirelessly to onstage performers
- Rock-solid wireless connection to P3R receiver over 300' (90m) range
- One-touch IR sync instantly links transmitter to receiver
- Up to 30 mW output power (region dependent)
- 24 MHz tuning range (region dependent)
- 6.3mm (1/4') TRS balanced inputs and loop outputs
- High-contrast LCD menu with detailed L/R audio output meters
- Detachable antenna
- External power supply
- Selectable line/aux level
- P3R Wireless Body-pack Receiver:
- Slim, lightweight, durable design
- Frequency scan and IR sync quickly find and assign a clean channel
- MixMode technology enables adjustment of two independent monitoring mix levels
- Stereo mode enables adjustment of left/right balance
- Easy-to-adjust volume knob and mix control
- 2 AA batteries provide up to 6 hours of continuous operation
- Power save mode preserves battery life when earphones are not connected
- Power and battery status LED
Specifications:
- SE215 Sound Isolating Earphones:
- Single dynamic driver for clear sound and deep bass
- Sound Isolating design blocks up to 37 dB of outside noise
- Secure, over-the-ear design for comfort
- Gold-plated MMCX connector with 360-degree rotation
- Detachable cable for durability and easy replacement
- Includes zippered carrying case and fit kit
- Two-year warranty for live performance durability
- PSM 300 Monitor System:
- RF Carrier Range: 488-937.5MHz (varies by region)
- Compatible Frequencies (per band): up to 15
- Tuning Bandwidth: 24MHz maximum (varies by region)
- Operating Range (environment dependent): 90m (300')
- Audio Frequency Response: 38Hz-15kHz
- Signal-to-Noise Ratio (A-weighted): 90dB (typical)
- Total Harmonic Distortion (ref. ±34 kHz deviation @1kHz): <0.5% (typical)
- Companding: Patented Shure Audio Reference Companding
- Spurious Rejection (ref. 12dB SINAD): >80dB (typical)
- Frequency Stability: ±2.5ppm
- MPX Pilot Tone: 19kHz (±1Hz)
- Modulation: FM*, MPX Stereo (ref. ±34kHz deviation @ 1kHz)
- Operating Temperature: 0 ° to 145°F (-18 ° to +63°C)
- P3T Wireless Transmitter:
- RF Output Power: 10, 20, 30mW (varies by region)
- RF Output Impedance: 50 Ω (typical)
- Net Weight: 1.73LBs (783g)
- Dimensions (HxWxD): 1.7 x 7.8 x 6.8' (43 x 198 x 172mm)
- Power Requirements: 12-15V DC, 260mA maximum
- Audio Input:
- Connector Type: 6.35mm (1/4') TRS
- Polarity: Tip positive with respect to ring
- Configuration: Electronically balanced
- Impedance: 40kΩ (actual)
- Nominal Input Level: Switchable, +4dBu, -10dBV
- Maximum Input Level: +4dBu: +22dBu; -10dBV: +12.2dBu
- Pin Assignments: Tip=hot, Ring=cold, Sleeve=ground
- Phantom Power Protection: Up to 60V DC
- Audio Output:
- Connector Types: 6.35mm (1/4') TRS
- Configuration: Electronically balanced
- Impedance: Connected directly to inputs
- P3R Wireless Body-pack Receiver:
- Active RF Sensitivity (at 20dB SINAD): 2.2 μV
- Image Rejection: >90dB
- Adjacent Channel Rejection: >60dB
- Inter-modulation Attenuation: >50dB
- Blocking: >60dB
- Audio Output Power (1kHz @ <1% distortion, peak power, @32Ω): 80mW (per output)
- Minimum Load Impedance: 16Ω
- Headphone Output: 3.5mm (1.8') stereo
- Net Weight (without batteries): 0.22LBs (98g)
- Dimension (HxWxD): 4.33 x 2.52 x 0.83' (110 x 64 x 21mm)
- Battery Life (continuous use): 5-7 hours, AA batteries
- SE215 Sound Isolating Earphones:
- Sensitivity: 107 dB SPL/mW
- impedance: 20Ohm
- Frequency Range: 22Hz - 17.5kHz
- Cable Style: 64' Detachable (at ear) with wire-form fit
- Colors: Clear or Translucent Black
- Speaker Type: Dynamic MicroDriver
- Connectors: Gold-Plated 3.5mm Stereo Mini Plug
- Isolation: Up to 37dB
- Driver: Dynamic MicroDriver
The Shure PSM300 Twin Pack Pro is perfect for performers on stage. It provides a reliable monitoring solution for up to two people. The system includes a durable metal construction multi-body-pack with SE215 Sound Isolating earphones for precise stereo mixes. The PSM 300 Monitor System wirelessly sends two channels of audio with 24-bit digital audio for clear sound. It has features like patented Audio Reference Companding, wide stereo separation, and a 300 ft (90 m) range. The P3T Wireless Transmitter is a single channel, half-rack with a rack mount kit, sending a mix wirelessly. The P3R Wireless Body-pack Receiver is slim, lightweight, and has easy controls. The SE215 Sound Isolating Earphones deliver clear sound with deep bass and block outside noise. Overall, it's a great choice for those seeking high-quality stage monitoring. Dimensions vary: P3T Wireless Transmitter is 1.7 x 7.8 x 6.8' (43 x 198 x 172mm) and weighs 1.73LBs (783g); P3R Wireless Body-pack Receiver without batteries is 4.33 x 2.52 x 0.83' (110 x 64 x 21mm) and weighs 0.22LBs (98g).
