Shure BETA 98H/C Cardioid Condenser Clip-on Gooseneck Microphone
Get crystal-clear sound with this amazing microphone! It's perfect for musicians and audio enthusiasts. • High gain-before-feedback and noise rejection for a clean sound. • Preamplifier circuitry for enhanced linearity across the full frequency range. • Tailored response for natural sound reproduction.
Features:
- The Beta 98 H/C feature transformerless preamplifier circuitry which improves linearity across the full frequency range.
- The pickup pattern provides high gain-before-feedback and excellent rejection of unwanted noise.
- Its high maximum sound pressure level (SPL) enables it to handle the extreme demands of brass, woodwind and percussion instruments.
- The Beta 98H/C features a 3 m (10 ft.) high-flex cable with attached preamplifier (XLR connection)
- Tailored frequency response for open, natural sound reproduction
- Compact, lightweight construction provides a low degree of visibility
- Gooseneck, ratcheting swivel joint and gooseneck angle brace allow for optimum placement and fixed positioning
Specifications:
- Cartridge Type: Electret Condenser
- Frequency Response: 20 to 20,000 Hz
- Polar Pattern: Cardioid
- Output Impedance: 150 Ω
- Sensitivity (at 1 kHz, open circuit voltage): –56 dBV/Pa (1.6 mV)(1 Pascal=94 dB SPL)
- Maximum SPL (1 kHz at 1% THD, 1KΩ load): 155 dB SPL
- Equivalent Output Noise (A-weighted): 31 dB SPL (typical)
- Dynamic Range (at 1 kHz, 1KΩ load):
- Clipping Level (1 kHz at 0.25% THD, 1KΩ load): 3 dBV (1.4 V)
- Signal-to-Noise Ratio (Referenced at 94 DB SPL at 1 kHz): 63 dB
- Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3
- Power Requirements: 11–52 VDC phantom power (IEC-61938), 1.2 mA
This Shure BETA 98H/C Cardioid Condenser Clip-on Gooseneck Microphone is perfect for musicians looking to capture the best sound. It's great for live performances, recording studios, or even home practice. The microphone features a gooseneck design for easy positioning, and a compact, lightweight construction for low visibility. It has a frequency response of 20 to 20,000 Hz, a cardioid polar pattern, and an output impedance of 150 Ω. It requires 11–52 VDC phantom power and 1.2 mA.
