Shure ANI22-XLR: Your Ultimate 2-Channel Audio Network Interface with Dante
Upgrade your audio setup with this amazing interface! It lets you connect 2 analog mic or line inputs and 2 analog outputs to a Dante network effortlessly. Enjoy easy audio routing and convenient browser-based remote control. It's a great addition to your existing audio gear.
Features:
- • Effortlessly convert up to 2 mic/line analog signals onto a Dante Network
- • Convert up to 2 Dante digital audio signals to line/mic analog signals with XLR connectors (2 in, 2 out)
- • Power-over-Ethernet (PoE) means no need for an outboard power supply
- • Compact design for easy mounting without an equipment rack
Specifications:
- Inputs (Analog): 2 x 3-pin XLR connectors
- Outputs (Analog): 2 x 3-pin XLR connectors
- Dante Connection:
- 1 x RJ45
- Channel Count: 2 inputs, 2 outputs
- Polarity: Non-inverting, any input to any output
- Power Requirements: Power over Ethernet (PoE), Class 0 (PoE Plus compatible)
- Power Consumption: 11 W maximum
- Application Control: HTML5
- Operating Temperature Range: 20 to 104°F (-6.7 to 40°C)
- Storage Temperature Range: 20 to 165°F (-29 to 74°C)
- Thermal Dissipation:
- Maximum: 12.1 W (41.3 BTU/hr)
- Typical: 9.8 W (33.7 BTU/hr)
- Audio:
- Frequency Response: 20 Hz to 20 kHz ±1 dB
- Dante Audio Flows: Sampling Rate: 24-bit/48 kHz
- Latency:
- Does not include Dante latency
- Analog to Dante: 0.35 ms
- Dante to Analog: 0.71 ms
- Analog Gain Range: 51 dB (adjustable in 3 dB steps)
- Dynamic Range: 113 dB, 20 Hz to 20 kHz, A-weighted, typical
- Equivalent Input Noise:
- 20 Hz to 20 kHz, A-weighted, input terminated with 150 Ohms
- Analog Gain Setting = +0 dB, -93 dBV
- Analog Gain Setting = +27 dB, -119 dBV
- Analog Gain Settings = +51 dB, -130 dBV
- Total Harmonic Distortion (THD): @ 1 kHz, 0 dBV Input, 0 dB analog gain <0.05%
- Common Mode Rejection Ratio: >70 dB, 50 Ohms balanced source @ 1 kHz
- Input Impedance: 5 kOhms
- Output Impedance: 150 Ohms
- Input Clipping Level:
- Analog Gain Setting = +0 dB, +20 dBV
- Analog Gain Setting = +27 dB, -7 dBV
- Analog Gain Setting = +51 dB, -31 dBV
- Analog Output Levels:
- Selectable Line 0 dB
- Aux -20 dB
- Mic -46 dB
- Digital Signal Processing (DSP):
- Per Channel: Equalizer (4-band Parametric, Dante channels only), Mute, Limiter, Gain (140 dB range)
- System: Channel Summing
- Networking: Cat 5e or higher (shielded cable recommended)
- Dimensions (H x W x D): 1.6 x 5.5 x 5.0' (4 x 14 x 12.8 cm)
- Weight: 1.5 lb (672 g)
The Shure ANI22-XLR is a must-have for audio enthusiasts and professionals. It's perfect for those who want to streamline their audio setup. Whether you're in a recording studio, a live event venue, or a broadcast station, this interface makes it easy to connect your analog audio sources to a Dante network. With its compact size of 1.6 x 5.5 x 5.0' (4 x 14 x 12.8 cm) and weight of 1.5 lb (672 g), it's easy to install and doesn't take up much space. Get the Shure ANI22-XLR today and take your audio experience to the next level!
