ETC Selador Desire D40XTI Lustr+ LED Par - Silver
Bring the amazing control of the seven - color x7 system to your facility with ETC's Desire Series D40XTI. This fixture is IP66 rated, perfect for both indoor and outdoor use. The Selador x7 Color System offers a wide range of balanced and saturated color choices. The D40XTI features a rugged die - cast enclosure, noiseless fan - free operation, and multiple lens options that can be changed on site.
The D40 Lustr+ front light wash fixture is optimized for skin tones and light tints.
Features:
- • Easy setup via any RDM device like ETC Gateways and Gadget
- • 40 LED variable color - mixing light wash fixture (color mixing fixtures) and 40 LED white - light wash fixture (static white fixtures)
- • ETL listed to UL1598
- • IP66 - rated for exterior wet location use
- • Data termination board for easy installation (included)
Specifications:
- General:
- • Easy setup via any RDM device like ETC Gateways and Gadget
- • 40 LED variable color - mixing light wash fixture (color mixing fixtures) and 40 LED white - light wash fixture (static white fixtures)
- • ETL listed to UL1598
- • IP66 - rated for exterior wet location use
- • Data termination board for easy installation (included)
- Physical:
- • Rugged die - cast all - metal housing
- • Accesory ring for installation of secondary lenses
- • Available in silver
- • Hanging yoke standard.
- • Effective Projected Area (EPA): 0.74
- Electrical:
- • 100VAC to 240VAC 50/60 Hz universal power input
- • Waterproof, 39” outdoor rated power lead
- • Up to 10 fixtures (15A max) may be fed on the same circuit
- • Requires power from a non - dim source
- LED:
- • 50,000 hour LED life (50,000 hours to 70% intensity)
- • 40 Luxeon Rebel LED emitters
- • Studio Daylight and Studio Tungsten use Rebel ES white light emitters for higher output
- Color:
- • Exclusive x7 Color System seven - color LED array
- • Broad spectrum color interacts seamlessly with conventional sources
- • Beautifully illuminates skin tones and other objects for natural appearance and high color rendering
- • Exclusive red - shift option emulates tungsten dimming performance (not available on static white fixtures)
- • Studio HD array uses warm and cool white light emitters with additional deep color emitters
- • Studio Tungsten and Studio Daylight provide good color rendering at very high brightness
- Optical:
- • Primary field angle of 17° and beam angle of 8°
- • Secondary lenses available for multiple beam spread options
- • Lenses must be ordered separately
- • Refer to accessories chart for lenses available
- Control:
- • DMX512 in and thru via termination board (included)
- • See DMX Control Table for operation modes
- • 15 - bit virtual dimming engine provides smooth, high quality theatrical fades and minimizes color shift during dimming
- • RDM functionality for address and setting changes
- Thermal:
- • Ambient operating temperature of - 4° to 104°F (- 20° to 40°C)
- • Active electronic thermal management for droop - free operation
- • Noiseless, fan - free convection cooling for acoustically sensitive installations
- • Fixture is designed for continuous operation up to 104°F (40°C) ambient temperature and requires free flow of air around fixture housing
This ETC Selador Desire D40XTI Lustr+ LED Par - Silver is perfect for lighting up stages, theaters, and event venues. It's ideal for lighting professionals and venue owners. With an IP66 rating, it can be used both indoors and outdoors. It has a rugged die - cast all - metal housing for durability. The effective projected area (EPA) is 0.74. It operates on 100VAC to 240VAC 50/60 Hz universal power input and comes with a 39” waterproof outdoor rated power lead.
