Martin VDO Fatron 20 320mm Outdoor LED Video Batten
Expand your creative VDO toolbox! This dynamic and flexible LED video batten makes your P3 System Controller even more versatile.
VDO Fatron 20 is a 20 mm pixel pitch outdoor-rated LED video batten with a wide range of optical accessories. Create amazing 3D stage designs with ease. Mix and match with other Martin LED video products via the P3 System Controller. Installation is a breeze with its integrated power and data cabling. Let your creativity soar!
- • Perfect for 3D stage setups - unleash your creativity!
- • Wide range of field-exchangeable diffusers and lenses for endless looks
- • Easy setup, mapping, and configuration via P3 System Controller
Features:
- • Supported by integrated power and data processor and simple cabling
- • Combined power and data cabling (compatible with other products)
- • P3/DMX/RDM controllable with automatic protocol detection
- • Extensive built-in effects
- • Intuitive mapping and addressing via P3 System Controller
- • Fully brightness and color calibrated for consistency
- • Pixel-level brightness and color calibration for a homogenous look
- • High-quality 16-bit per color image processing technology
- • 20 mm pixel pitch
- • 500 cd per meter calibrated
- • 1500 lumen per meter calibrated
- • 8 different diffuser options + 1 lens option (field-exchangeable)
- • IP65 rated for outdoor use
- • Versatile rigging accessories
- • Length: 320 mm
Specifications:
- Physical
- • Length: 320 mm (12.6 in.)
- • Width: 80 mm (3.15 in.)
- • Height without front: 28 mm (1.10 in.)
- • Height with standard front (Square Diffuser): 48 mm (1.89 in.)
- • Weight without front: 0.85 kg (1.9 lbs.)
- • Weight with standard front (Square Diffuser): 0.95 kg (2.1 lbs.)
- Control and Programming
- • Control options: Martin P3 System Controller or DMX
- • Protocol detection: Automatic
- • Control modes: RGB, basic, segment, and pixel-level
- • Setting and addressing: Martin P3 System Controller or RDM-compliant controller
- • Control resolution: 16-bit (P3) or 8-bit (DMX) per color
- • Color and intensity calibration: Pixel-level
- • DMX compliance: USITT DMX512-A
- • RDM compliance: ANSI/ESTA E1.20
- • Firmware update: Via Martin P3 System Controller
- • DMX channels: 3/10/19/55
- Control/User Interface
- • Device status: Multi-color visual indication
- • Device test and reset: Magnetic pushbutton
- Optics
- • Minimum LED lifetime: 50,000 hours (to >70% luminous output)*
- *Figure obtained under manufacturer's test conditions.
- Options
- • Open Front
- • Flat Diffuser
- • Smoked Flat Diffuser
- • Round Diffuser
- • Smoked Round Diffuser
- • Square Diffuser (standard)
- • Smoked Square Diffuser
- • NoBlend Diffuser
- • Smoked NoBlend Diffuser
- • Lens Array Narrow
- • All optical accessory options are interchangeable
- Photometric Data
- • Color resolution: 16 bits per color (48 bits per pixel)
- • Viewing angle: 120° x 120°
- • LED array: 4 x 16
- • Pitch (pixel center-to-center): 20.00 mm
- • Luminous intensity, calibrated mode: 500 cd per meter
- • Total output, calibrated mode: 1500 lumens per meter
- • Total output, calibrated mode: 6250 nits
- Video Processing
- • Brightness control
- • Gamma correction and control
- • Color temperature control
- • Color space control
- • Calibration processing
- • Synchronization
- Signal Protocol
- Installation
- • Orientation: Any
- • Mounting: Channel for M6 captive nuts on back of profile
- • Mounting options: M6 bolts, optional sliding bracket (accepts M12 bolt)
- Connections
- • Power and data input: 6-pin custom (BBD) IP66-rated
- • Power and data thru: 6-pin custom (BBD) IP66-rated
- • Hot plugging compatible
- Electric
- • Nominal input voltage: 48 VDC +/- 4%
- • Maximum power consumption, all LEDs at full intensity, VDO Fatron 20, 320 mm: 20 W
- • Power supply options: Martin P3 PowerPort 1500, Martin P3 PowerPort 1000 IP, Martin IP66 PSU 240W or generic 48 VDC PSU
- Thermal
- • Cooling: Convection
- • Maximum ambient temperature (Ta max.) for typical video content: 45° C (113° F)
- • Minimum ambient temperature (Ta min.): -20° C (-4° F)
- • Max. total heat dissipation, calculated, +/- 10%: 70 BTU/hr
- Approvals
- • EU safety: EN 60950-1, EN 60950-22, EN 62471
- • EU EMC: EN 55024, EN 55032
- • US safety: UL 60950-1, UL 60950-22
- • US EMC: CFR Title 47 Part 15 Class A
- • Canadian safety: CSA C22.2 No. 60950-1, No. 60950-22
- • Canadian EMC: ICES-003 Class A
- • Australia/NZ: RCM
This Martin VDO Fatron 20 320mm LED video batten is perfect for stage designers and lighting professionals looking to create dynamic 3D setups. With a 20 mm pixel pitch and a wide range of optical accessories, it offers endless creative possibilities. The batten is 320 mm long, 80 mm wide, and weighs between 0.85 kg (without front) and 0.95 kg (with standard front). It's easy to install and control via the P3 System Controller, and is IP65 rated for outdoor use.
