ETC Desire D60XTI Vivid LED Par - The Ultimate Lighting Solution
Discover the ETC Desire Series D60XTI! It brings amazing control of the x7 Color System and a long throw to your facility for permanent installation. With an IP66 rating, it's perfect for both indoor and outdoor use. The x7 Color System offers a wide range of spectrally-balanced saturated and tinted color choices.
D60XTI Vivid - The x7 color system array is balanced for all-around use as a color-changing wash luminaire.
Specifications:
- Source:
- LED details: 60 Lumileds LUXEON Rebel LED
- Max lumens: Vivid: 3,760
- Lumens per watt: Vivid: 31.9
- L70 rating (hours to 70% output): 50,000 hours
- Color:
- Colors used: Vivid: Red, Red-Orange, Amber, Green, Cyan, Blue, Indigo
- Color temperature range: 2,700–6,500 K
- Calibrated array: Vivid: Yes
- Red shift: Yes (not available on static white)
- Optical:
- Beam angle range: 8°–17°
- Aperture size: 9 in
- Pattern projection: No
- Pattern size: N/A
- Camera flicker control/Hz range: Yes: 900–25,000 Hz
- Notes: Secondary lenses available for multiple beam-spread options
- Control:
- Input method: DMX512 via termination board
- Protocols: DMX512/RDM
- RDM configuration: Yes
- UI type: None (configure via RDM)
- Local control: No
- Onboard presets: Yes
- Onboard sequences: No
- Onboard effects: No
- Fixture-to-fixture control: No
- Notes: 15-bit virtual dimming engine
- Electrical:
- Voltage range: 100–240 VAC 50/60 Hz
- Input method: Waterproof, 72″ outdoor power lead/Requires power from non-dim source
- Inrush: 46 A at 120 V (First half-cycle) 77 A at 240 V (First half-cycle)
- Fixtures per circuit(All measurements are for 120 V, 60 Hz. Results may vary in different regions.): 10 (15 A may be fed on same circuit)
- Wattage typical: 124
- Current draw: 1 A
- Thermal:
- Ambient operating temp: -20°–40° C (-4°–104° F)
- Fan (controllable): No
- Droop compensation: Yes
- dB range: N/A
- BTUs/hour: 423.088
- Physical:
- Materials: Die-cast, all metal housing
- Color options: Black
- Mounting options: Single-pole mount, wall or square pole mount, twin fixture pole mount
- IP rating: IP66 for exterior wet-location
- Weight: 10.43 kg (23 lb)
- Included accessories: Hanging yoke, data termination board, accessory ring for installations of secondary lenses
- Notes:
- Cable diameter: power 0.53 in
- Effective projected area (EPA): 0.95
- Warranty:
- Fixture: 5 years
- LED array: 10 years
- Regulatory and Compliance:
- Approved regulatory standards:
- cETLus Listed
- Conforms to UL1598
- Certified to CSA C22.2 No. 250.0
- CE Compliant
The ETC Desire D60XTI Vivid LED Par is perfect for both indoor and outdoor lighting needs. It's great for event venues, stage shows, and architectural lighting. Targeted at lighting professionals and event planners. With a die-cast all-metal housing, it has a weight of 10.43 kg (23 lb). It offers multiple mounting options like single-pole mount, wall or square pole mount, and twin fixture pole mount. The beam angle range is 8°–17°, and the aperture size is 9 in. It comes with an IP66 rating for exterior wet-location use.
