ETC Desire D40XT Lustr+ LED Par - The Ultimate Outdoor Lighting Solution
Light up your outdoor events with the ETC Desire Series D40XT! This round theatrical wash light features a fully sealed IP66 rating, making it perfect for any outdoor installation. The x7 Color System offers a wide range of spectrally-balanced saturated and tinted color choices, allowing you to create the perfect lighting setup for any occasion.
Key Features:
• Rugged die-cast enclosure for durability
• Noiseless fan-free operation for a quiet environment
• Multiple lens options for customized lighting effects
D40XT LED ARRAY OPTIONS- The D40XT fixtures are based on the x7 Color System, which uses seven different LED colors to achieve true, usable broad-spectrum color. Choose from the following x7 color arrays to best suit your intended application:
D40XT Lustr+ – optimized with six colors plus high-intensity white LEDs to create an ideal front light wash fixture. Perfect for highlighting lighter colors and white.
Specifications:
- Source:
- LED details: 40 Lumileds LUXEON Rebel 2.5 W LED
- Max lumens: Lustr+: 2,593
- Lumens per watt: Lustr+: 25.2
- L70 rating (hours to 70% output): 50,000 hours
- Color:
- Colors used: Lustr+: Red, Amber, Green, Cyan, Blue, Indigo, White
- Color temperature range: 2,700–6,500 K
- Calibrated array: Lustr: Yes
- Red shift: Yes
- Optical:
- Beam angle range: 8°–71°
- Aperture size: 7.5 in
- Pattern projection: No
- Pattern size: N/A
- Camera flicker control/Hz range: Yes: 900–25,000 Hz
- Notes: Secondary lenses available for multiple beam-spread options
- Control:
- Input method: DMX512 via watertight 5-pin XLR
- Protocols: DMX512/RDM
- RDM configuration: Yes
- UI type: LCD
- Local control: Yes
- Onboard presets: Yes
- Onboard sequences: Yes
- Onboard effects: No
- Fixture-to-fixture control: Yes
- Notes: 15-bit virtual dimming engine
- Electrical:
- Voltage range: 100–240 VAC 50/60 Hz
- Input method: Waterproof, 39 in power in and thru
- Inrush- :
- 15 A at 120 V (First half-cycle)
- 40 A at 240 V (First half-cycle)
- Fixtures per circuit (*All measurements are for 120 V, 60 Hz. Results may vary in different regions):
- 9 (15 A power thru connector)
- 10 (R20 module or similar)
- Wattage typical: 110
- Current draw: 1/0.5
- Thermal:
- Ambient operating temp: -20°–40° C (-4°–104° F)
- Fan (controllable): No
- Droop compensation: Yes
- dB range: N/A
- BTUs/hour: 375.32
- Physical:
- Materials: Die-cast, all metal housing
- Color options: Silver
- Mounting options: Yoke
- IP rating: IP66 for exterior wet location use
- Weight: 6.4 kg (14 lb)
- Included accessories: Hanging yoke, 5 ft power cord, media holder
- Warranty:
- Fixture: 5 years
- LED array: 10 years
- Regulatory and Compliance:
- Approved regulatory standards- :
- cETLus Listed
- Conforms to UL1598
- Certified to CSA C22.2 No. 250.0
- CE Compliant
The ETC Desire D40XT Lustr+ LED Par is the ultimate outdoor lighting solution for events and installations. Its rugged die-cast enclosure and noiseless fan-free operation make it durable and quiet. With multiple lens options and a wide range of color choices, you can create customized lighting effects. The D40XT Lustr+ is optimized with six colors plus high-intensity white LEDs for a perfect front light wash. It has a 7.5 in aperture size, a beam angle range of 8°–71°, and a weight of 6.4 kg (14 lb). The fixture is IP66 rated for outdoor use and comes with a hanging yoke, 5 ft power cord, and media holder. Ideal for event planners and lighting professionals.
