Martin 210 RGBW Color Mixing Exterior Wash Light - 10 Degree - EU Version - White
Illuminate your mid-sized structures and building facades with the powerful, compact, and energy-efficient Martin Exterior Wash 210. Its sleek design is enhanced by an optional, discreet snoot. Enjoy ease-of-use with its built-in display, choose from a wide range of beam angles, and rest assured it's fully IP-rated for permanent outdoor use.
Designed for superior color mixing, the Exterior Wash 210 is based on quad-color premixed LEDs.
Features:
- • Powerful premixed LEDs for bright illumination
- • Up to 4900 lumens at full white (RGBW) for brilliant light output
- • Six different beam angle options for versatile lighting
Specifications:
- Physical:
- Length: 270 mm (10.7 in.)
- Width: 334 mm (13.2 in.)
- Height: 382 mm (15.1 in.)
- Weight: 13.0 kg (28.7 lbs.)
- Dynamic Effects:
- Intensity: 0 - 100%
- Color mixing: RGBW
- Control and Programming:
- Control systems: DMX, RDM
- Stand-alone control: Up to 20 scenes with global fade/hold times
- Setting, addressing, standalone programming: Control panel with OLED display
- DMX channels: 3-5 depending on DMX mode
- Receiver: RS-485
- DMX compliance: USITT DMX512-A
- RDM compliance: ANSI/ESTA E1.20
- Firmware update: Serial upload via DMX link
- Optics:
- Light source: 19 x RGBW quad-color LEDs
- Minimum LED lifetime: 50,000 hours (to >70% luminous output)
- LED manufacturer: Cree
- Beam Angle Options:
- No diffuser: 10.5¡«
- Narrow diffuser: 14¡«
- Medium diffuser: 24¡«
- Wide diffuser: 43¡«
- Very wide diffuser: 63¡«
- Asymmetric diffuser: 61¡« x 16¡«
- Binning: Tight color and flux binning
- Calibration: Full Gamut Color Calibration
- Photometric Data:
- CRI (Color Rendering Index) : > 70
- CCT: 6500 K (White LED)
- Total luminous output: 4900 lumens
- Construction:
- Housing: Cast aluminum
- Color: White
- Ingress protection rating: IP66
- Surface treatment: Anodized and electrostatic powder-coated
- Effective Projected Area (EPA): 0.1 m2 including snoot
- Impact resistance: IK08 (with control panel display cover plate installed)
- Corrosion resistance: C5-M (very high corrosivity / marine, ISO 12944)
- Vibration resistance: 1.0g, Sinusoidal (IEC 60068-2-6)
- 0,7g RMS Random (IEC 60068-2-64)
- Installation:
- Mounting: Adjustable yoke
- Orientation: Any
- Minimum distance to illuminated surfaces: 0.2 m (0.6 ft.)
- Connections:
- Power connection: 1.8 m (5.9 ft.) cable tail without connector
- Power input cable type, EU models: H05RN-F 300/500V, 3 x 0.75 mm2, 7 mm
- Power input cable type, US models: SJOW 18AWG, 300V, WL F1, 8 mm
- Data connection: 1.8 m (5.9 ft.) open ended 5-conductor combined input + output cable tail
- All cable entries: IP68 cable gland
- Electrical:
- AC power: 100 - 240 / 277 V nominal, 50/60 Hz
- Power supply unit: Integrated, auto-sensing multi-voltage
- Power Consumption: 3 W (steady state, all LEDs at zero intensity)
- Typical half-cycle RMS inrush current: 10.3 A
- Maximum total power consumption: 165 W
- Surge protection: 4 KV
- Max earth leakage: 0.50 mA
- Typical Power and Current:
- 100 V, 60 Hz: 1.5 A, 148 W, PF 0.99
- 120 V, 60 Hz: 1.25 A, 146 W, PF 0.99
- 230 V, 50 Hz: 0.7 A, 146 W, PF 0.95
- 277 V, 60 Hz: 0.6 A, 146 W, PF 0.88
- Thermal:
- Cooling: Convection
- Maximum ambient temperature (Ta max.): 45¡« C (113¡« F)
- Minimum ambient temperature (Ta min.): -30¡« C (-22¡« F)
- Maximum surface temperature, steady state, at 40¡« C ambient: 55¡« C (131¡« F)
- Total heat dissipation (calculated, +/- 10%): 485 BTU/hr
The Martin Exterior Wash 210 is perfect for lighting up mid-sized structures and building facades. It's great for those in the architectural and lighting design fields. With a length of 270 mm (10.7 in.), width of 334 mm (13.2 in.), height of 382 mm (15.1 in.), and weight of 13.0 kg (28.7 lbs.), it's easy to handle and install.
