Radial Voco-Loco: Unleash Your Mic's Potential with Guitar Effects
Take your microphone preamp and effects to the next level!
The Voco-Loco is a foot-controlled wonder that lets vocalists and acoustic instrumentalists add guitar effects pedals to their signal path. It's like a sonic playground for your mic!
Connect any mic to your guitar pedals effortlessly
Combine a microphone preamp with a guitar pedal effects loop. Whether you're a lead vocalist, sax player, or trumpet player, add guitar pedals to your audio signal path just like an electric guitarist does for soloing. Plug your mic into the Voco-Loco via the XLR input, connect your effects pedals with standard guitar cables, and send the output to your mixer's input. With a touch of a footswitch, add delay, reverb, distortion, or wah-wah to any mic'd instrument or vocal - the possibilities are endless!
Voco-Loco Applications
Voco-Loco on voice
Plug in your microphone and use guitar pedals to add echo, reverb, or distortion effects and control them as you like.
Voco-Loco with brass
Add echo, chorus, or wah to your sax or trumpet solos and stand out from the crowd with a unique performance your audience will never forget!
Voco-Loco with harmonica
Incorporate chorus, overdrive, and reverb into your harp solos and deliver amazing tones without bringing an amp to the gig. The blues have never sounded so good!
Features:
- • Add guitar effects pedals to vocal or instrument mics
- • Create exciting and unique effects while performing
- • Turn on multiple effects with one footswitch
- • Works with dynamic and condenser microphones
- Mute Loop
Set the left footswitch function to Mute or All Wet. - Mic In
Adjust the input level of the Voco-Loco's mic preamp. - Mute / All Wet
Footswitch activates the MUTE or ALL WET function. - Low / High
Use dual band shelving EQ to add bass for a warmer voice or add sparkle for extra cut. - Send / Receive
Adjust the level going to the pedals with individual send and receive controls to optimize signal-to-noise and reduce distortion. - Tone
Tame the sound of the effects return path to soften harsh tones from certain pedals. - Loop Web / Dry
Primary footswitch turns on or off the effects loop with wet/dry mix engaged. - Mix
Set the wet/dry mix between the original unprocessed vocal sound and the effects loop. - Power
Comes with an external 400mA 15VDC supply for powering. - Line Output
Standard XLR male output to connect to the line input of a mixing console. - Lift
Eliminate ground loops by lifting pin-1 on the XLR. - 180°
Reverse the polarity of the effects loop to ensure guitar pedals are in phase with the vocal mic. - Send / Receive
Unbalanced jacks to send the mic signal to the guitar pedals and back into the Voco-Loco. - 48V
Recessed switch turns on the phantom power when using with a condenser microphone. - Mic Input
Standard XLR female input to connect your microphone. - 14-Gauge Steel
Heavy duty construction for durability and excellent shielding against magnetic fields and RF noise. - Warranty: Radial 3-year, transferable
Specifications:
- Audio circuit type: Integrated Op-Amp with Class A FET input circuit
- Frequency response: 20Hz ~ 20kHz
- Dynamic range:100dB
- Gain:52dB
- Clip Level: +15dBu
- Total harmonic distortion:<0.005%
- Intermodulation Distortion: <0.005%
- Phase Deviation: 8° @50Hz
- Input Impedance: 10K-Ohms, 100K (FX Loop)
- Output Impedance: 300 Ohms, 3000 Ohms (FX Loop)
- Common Mode Rejection Ratio: -73dB @55Hz
- Equivalent Input Noise: -120dBu
- Noise: -85dBu
- Maximum Input:+10dB
- Features
- Input pad, 180° polarity reverse, Ground lift, Effects Loop
- Input Connectors: XLR-F
- Output Connectors: XLR-M
- General
- Construction: 14 gauge steel chassis and outer shell
- Power:100mA, center positive
- Conditions: For use in dry locations only between 5°C and 40°C
The Radial Voco-Loco is a must-have for musicians looking to enhance their sound. It's perfect for vocalists, acoustic instrumentalists, and those using brass or harmonica. Here's how it works: - Connect any mic to your guitar pedals easily. Combine a microphone preamp with a guitar pedal effects loop. Plug your mic into the XLR input, connect pedals with guitar cables, and send the output to your mixer. Add effects like delay, reverb, distortion, or wah-wah with a footswitch. - Use it on voice, brass, or harmonica. Add echo, reverb, or distortion to your vocals. Make your sax or trumpet solos stand out with unique effects. Deliver amazing tones on your harmonica without an amp. - Technical specs: Comes with an external 400mA 15VDC supply. Has features like Mute Loop, Mic In, and more. Works with dynamic and condenser mics. Built with 14-gauge steel for durability. Warranty: 3-year, transferable.
