The Ultimate 16x16 AES3 Digital Dante Audio Interface for Unmatched Sound Quality
Get ready to revolutionize your audio setup with the RedNet D16R MkII! This 16-channel bi-directional digital interface for Dante networks is a game-changer. • Precision Control: Enjoy individual input and output channel level controls, allowing for precise calibration and control of all input and output levels using RedNet Control. • Redundancy for Peace of Mind: Includes power supply and Ethernet redundancy with auto switchover in case of failure. • Versatile Connectivity: With various connection options, it's a flexible addition to any Audio-over-IP system.
Features:
- 16-channel bi-directional digital interface for Dante networks.
- Individual input and output channel level control using RedNet Control software.
- Dual PSUs with locking IEC inlets.
- Dual locking etherCON connectors for Primary and Secondary network connections.
- Power supply and ethernet redundancy with auto switchover in case of failure.
- Front-panel LED indicators for PSU, network, sample rate, signal present, and clock source status.
- Sample rate conversion on all input channels.
- Two DB25 connectors with AES59 standard configuration; each carries eight channels of AES3 I/O.
- RCA connectors for two-channel S/PDIF input and output.
- XLR connections for alternate AES3 I/O and DARS input.
- BNC connectors for Word Clock input and output.
- Compact 1U chassis allows maximum functionality in minimum rack space.
- Full operability with Focusrite RedNet and Red interfaces, plus all Dante devices from hundreds of manufacturers.
- Remote routing and control using RedNet Control and Dante Controller.
Specifications:
- Input / Output Trim:
- Input Trim: -78 to 0dB in 1dB steps (per channel)
- Output Trim: -78 to 0dB in 1dB steps (per channel)
- Input Sample Rate Converters:
- Sample Rate Range: 32Hz to 214kHz
- Gain Error: -0.3dB
- Dynamic Range: Greater than 138dB (-60 dBFS method)
- THD + N: Less than -130dB (0.00003%); 0 dBFS input
- Latency: 11 to 45 samples (network and input sample rate dependent)
- Digital Performance:
- Supported Sample Rates: 44.1 / 48 / 88.2 / 96 / 176.4 / 192 kHz (-4% / -0.1% / +0.1% / +4.167%) at 24 bit
- Clock Sources: Internal, Word Clock, DARS, AES input 1-2, AES input 9-10 or from Dante Network Master
- External Word Clock Range: Nominal sample rate ±7.5%
- AES / EBU:
- Channel Count: 2 x 2 S/PDIF Channels (reduces AES/EBU input channels)
- Input And Output: 2 x DB25 connectors (AES59 Combined I/O / Tascam Digital)
- Alternate Input (Optional DARS): 1 x Female XLR (replaces DB25 channels 1-2)
- Alternate Output: 1 x Male XLR (duplicates DB25 channels 1-2)
- S/PDIF:
- Channel Count: 2 x 2 S/PDIF Channels (reduces AES/EBU input channels)
- Input: 1 x RCA phono socket (replaces DB25 channels 3-4)
- Output: 1 x RCA phono socket (switchable, duplicates any DB25 channel pair)
- Word Clock:
- Input: 1 x BNC 75Ω port (switchable termination)
- Output: 1 x BNC 75Ω port
- PSU & Network Connections:
- PSU: 2 x Internal, 100-240V, 50/60Hz, consumption 30VA
- Network: 2 x EtherCON NE8FBH-S, also compatible with standard RJ45 connectors (Accommodates rugged EtherCON NE8MC*. Does not intermate with Cat 6 cable connector NE8MC6-MO and NKE65* cable)
The RedNet D16R MkII is a 16-channel bi-directional digital interface designed for Dante networks. It's perfect for audio professionals and engineers looking to enhance their audio systems. With its compact 1U chassis, it fits neatly into any rack setup. The device features individual input and output channel level controls for precise calibration. It also offers power supply and Ethernet redundancy with auto switchover in case of failure. The input sample rate range is from 32Hz to 214kHz, with various digital performance specifications. It has multiple connection options including DB25, RCA, XLR, and BNC connectors. It's fully operable with Focusrite RedNet and Red interfaces, as well as Dante devices from hundreds of manufacturers, and allows for remote routing and control using RedNet Control and Dante Controller.
