BP4025 X/Y Stereo Field Recording Microphone
Unleash the power of professional audio with Audio-Technica's BP4025 stereo condenser microphone! Designed for broadcast and professional recording, this remarkable microphone offers large-diaphragm capsules in an innovative coincident capsule configuration. Experience pristine sound quality, exceptional low noise, and an accurate stereo image in a smaller housing. Ideal for professionals and enthusiasts alike, the BP4025 is fully RoHS-compliant, ensuring a clean and eco-friendly recording experience.
Features: - • Crisp, clear sound quality with large-diaphragm capsules
- • Compact and lightweight design for easy camera-mount use
- • Excellent channel separation for a professional sound
Specifications: - ELEMENT: Fixed-charge back plate permanently polarized condenser
- POLAR PATTERN: X/Y Stereo
- FREQUENCY RESPONSE: 20-17,000 Hz
- LOW FREQUENCY ROLL-OFF: 80 Hz, 12 dB/octave
- OPEN CIRCUIT SENSITIVITY: -32 dB (25.1 mV) re 1V at 1 Pa
- CHANNEL BALANCE: <2.5 dB
- IMPEDANCE: 170 ohms
- MAXIMUM INPUT SOUND LEVEL: 145 dB SPL, 1 kHz at 1% T.H.D.; 155 dB SPL, with 10 dB pad (nominal)
- DYNAMIC RANGE (typical): 131 dB, 1 kHz at Max SPL
- SIGNAL-TO-NOISE RATIO: 80 dB, 1 kHz at 1 Pa
- PHANTOM POWER REQUIREMENTS: 11-52V DC, 7 mA typical (both channels total)
- SWITCH: Flat, roll-off; 10 dB pad (nominal)
- WEIGHT: 269 g (9.5 oz)
- DIMENSIONS: 186.0 mm (7.32') long, 47.6 mm (1.87') head diameter, 21.0 mm (0.83') body diameter
- OUTPUT CONNECTOR: Integral 5-pin XLRM-type
- CABLE: 5.0 m (16.5') long, 8 conductor, shielded, vinyl-jacketed stereo cable with 5-pin XLRF-type connector at microphone end and two 3-pin XLRM-type connectors at output end
- ACCESSORIES FURNISHED: AT8405a stand clamp for 5/8'-27 threaded stands; windscreen; soft protective pouch
- AUDIO-TECHNICA CASE STYLE: S12
The Audio Technica BP4025 is a stereo condenser microphone designed for broadcast and professional recording. It features large-diaphragm capsules in an innovative coincident capsule configuration, delivering pristine sound quality and an accurate stereo image. The microphone is compact and lightweight, making it ideal for camera-mount use. It is fully RoHS-compliant and comes with a 5.0 m long, 8 conductor, shielded, vinyl-jacketed stereo cable with 5-pin XLRF-type connector at the microphone end and two 3-pin XLRM-type connectors at the output end. Accessories include an AT8405a stand clamp for 5/8'-27 threaded stands, a windscreen, and a soft protective pouch. The microphone weighs 269 g (9.5 oz) and has dimensions of 186.0 mm (7.32') long, 47.6 mm (1.87') head diameter, and 21.0 mm (0.83') body diameter. It is suitable for professionals in the broadcast and recording industry, as well as enthusiasts looking for high-quality audio recording equipment.
