AKG C451B Small Diaphragm Condenser Microphone

AKG's C 451B is a game-changer in the world of studio microphones! Inspired by the classic C 451, this updated version offers enhanced performance and versatility. Here's why it's a must-have for any recording setup: - **Ideal for Overhead Drum Miking:** The C 451B is perfect for capturing the rich transients of cymbals and drums. Its cardioid pattern and excellent transient response make it a favorite among engineers for overhead miking. - **Sonically Identical to the Classic C 451:** With its CK-1 cardioid capsule, the C 451B delivers the same precise and accurate sound as the original. Its improved design and all-metal body provide better protection from RF interference and handling noise. - **Increased Stability and Switchable High-Pass Filter:** The C 451B's capsule is permanently fixed to the preamp for increased stability. It also features a switchable preattenuation pad and high-pass filter for greater flexibility in recording. Whether you're a professional engineer or a hobbyist, the AKG C 451B is the perfect microphone for capturing the perfect sound. Order yours today and take your recordings to the next level! AKG C 451B Condenser Microphone Features: - Cardioid condenser mic with outstanding transient response - Frequency range 20Hz-20kHz - Sensitivity 9 mV/Pa (-41dBV) - Max. SPL 135/145/155dB (0/-10/-20dB) - Equivalent noise level (CCIR 468-3) 29dB - Equivalent noise level 18dBA - Signal/noise ratio (A-weighted) 76dB - Preattenuation pad 0dB, -10dB, -20dB selectable - Bass filter flat, 12dB/octave at 75 or 150Hz, selectable - Impedance <200 ohms - Recommended load impedance >1000 ohms - Supply voltage 9 to 52 volts phantom power - Current consumption <2 mA - 3-pin XLR connector - Satin nickel plated finish

The AKG C451B Small Diaphragm Condenser Microphone is a must-have for any professional studio or recording setup. Ideal for overhead drum miking and capturing rich transients, this microphone is also sonically identical to the classic C451 with improved design. It features increased stability and a switchable high-pass filter. Technical specs include a frequency range of 20Hz-20kHz, sensitivity of 9 mV/Pa (-41dBV), and a max SPL of 135/145/155dB (0/-10/-20dB). The microphone has an equivalent noise level of 29dB (CCIR 468-3) and 18dBA, a signal/noise ratio of 76dB (A-weighted), and a preattenuation pad that is selectable at 0dB, -10dB, and -20dB. The bass filter is flat or 12dB/octave at 75 or 150Hz, selectable, and the impedance is <200 ohms. The recommended load impedance is >1000 ohms, and the supply voltage is 9 to 52 volts phantom power. The microphone has a current consumption of <2 mA and a 3-pin XLR connector with a satin nickel plated finish.