Shure P9TRA + 425CL - H21 PSM1000 Monitor System: The Ultimate Solution for Professional Audio
Get ready to experience unparalleled audio quality with the Shure PSM1000 Dual-Channel Personal Monitor System. This comprehensive package is designed for professionals who demand nothing but the best in touring, stage events, or permanent installations.
• Dual Transmitter: Features a P10T full-rack dual-channel wireless transmitter for pristine RF signal.
• High-Quality Earphones: Comes with two pairs of SE425 sound isolating earphones for immersive audio.
• Advanced Receiver: Equipped with two P10R+ wireless bodypack receivers for enhanced signal reception.
In addition to the above, this system also includes antennas for both the transmitter and receivers, along with essential accessories like a hardware rackmount kit, link bar, zipper bag, bumper kit, and front-mount antenna cables. It's networkable via Ethernet, has internal power supply with IEC in/out ports, and is compatible with PSM 900 receivers. The bodypack is rechargeable, offering 49 compatible frequencies per band and a 66 MHz tuning bandwidth for flexibility in crowded RF environments. The P10R+ receiver conducts a full bandwidth scan for clean frequencies, and Wireless Workbench 6 software enables advanced RF spectrum plotting and frequency coordination, along with live monitoring and adjustment of transmitter settings.
Features:
- 2 x P10R+ Wireless Bodypack Receivers
- 2 x SE425 Sound-Isolating Earphones
- Full-Rack 2-Channel Wireless Transmitter
- Networkable via Ethernet
- Bodypack Rechargeability
- 49 Compatible Frequencies per Band
- 66 MHz Tuning Bandwidth
- Includes Antennas and Cables
- Includes Power Supply and Rackmount Kit
Specifications:
- Shure P10T Full-Rack Dual-Channel Wireless Transmitter:
- Specifications:
- RF Carrier Frequency Rang: 542-578 MHz
- Compatible Frequencies: Per Band: 39
- Tuning Bandwidth: 72 MHz
- Operating Range: 300' / 90 m (Environment Dependent)
- Frequency Response: 35 Hz to 15 kHz (±1 dB)
- Signal to Noise Ratio: 90 dB (Typical) A-Weighted
- Total Harmonic Distortion (THD): Ref. ±34 kHz Deviation at 1 kHz <0.5% (Typical)
- Companding: Patented Shure Audio Reference Companding
- Spurious Rejection: Ref. 12 dB SINAD: >80 dB (Typical)
- Frequency Stability: ±2.5 ppm
- MPX Pilot Tone: 19 kHz (±0.3 kHz)
- Modulation:
- FM (±34 kHz Deviation at 1 kHz)
- MPX Stereo Ref.
- Operating Temperature: 0 to 135°F / -18 to 57°C
- Transmitter:
- RF Output Power: Selectable: 10, 50, 100 mW (+20 dBm)
- RF Output Impedance: 50 Ohms (typical)
- Power Requirement:
- Input: 100 to 240 VAC, 50/60 Hz, 0.5 A Max (5.5, with Outlet Loaded)
- Output: 100 to 240 VAC, 50/60 Hz, 5 A Max, Unswitched
- Audio Input: Combination XLR-1/4' /6.3 mm TRS
- Polarity:
- XLR: Non-Inverting (Pin 2 Positive with Respect to Pin 3)
- 1/4' / 6.3 mm: Tip Positive with Respect to Ring
- Configuration: Electronically Balanced
- Impedance: 70.2 Kilohms (Actual)
- Nominal Input Level: Switchable: +4 dBu, -10 dBV
- Maximum Input Level:
- +4 dBu: +29.2 dBu
- -10 dBV: +12.2 dBu
- Pin Assignments:
- XLR: 1=Ground, 2=Hot, 3=Cold
- 1/4' / 6.3 mm TRS: Tip=Hot, Ring=Cold, Sleeve=Ground
- Phantom Power Protection: Up to 60 VDC
- Audio Output:
- Connector Type: 1/4' / 6.3 mm TRS
- Configuration: Electronically Balanced
- Impedance: Connected Directly to Inputs
- Physical Characteristics:
- Dimensions: 1.7 x 19.0 x 13.5' / 4.3 x 48.3 x 34.3 cm
- Weight: 10.4 lb / 4.7 kg
- Shure P10R+ Wireless Bodypack Receiver:
- Physical Characteristics
- RF Filter Range: Tri-Band: -3 dB at 30.5 MHz from the Center Frequency of Each Band
- RF Gain: Active: 31 dB (Adjusts RF Sensitivity to Provide More RF Dynamic Range)
- RF Sensitivity: 2.2 μV (20 dB SINAD)
- Squelch Threshold: 22 dB SINAD (±3 dB), Default Setting
- Adjacent Channel Rejection: >70 dB
- Intermodulation Attenuation: >70 dB
- Blocking: >80 dB
- Image Rejection: >90 dB
- Image Rejection: >90 dB
- Audio Output Power: 100 mW per Output (1 kHz @ <1% Distortion, Peak Power, @ 16 Ohms)
- Minimum Load Impedance: 4 Ohms
- Output Impedance: <1 Ohm
- 4-Band Parametric Equalizer:
- Low-Shelf Selectable Gain: ±2, ±4, ±6 dB @ 100 Hz
- Low-Mid Selectable Gain: ±2, ±4, ±6 dB @ 160, 250, 400, 500, 630 Hz
- Selectable Q: 0.7, 1.4, 2.9, 5.0, 11.5
- High-Mid Selectable Gain: ±2, ±4, ±6 dB @ 1, 1.6, 2.5, 4, 6.3 kHz
- Selectable Q: 0.7, 1.4, 2.9, 5.0, 11.5
- High-Shelf Selectable Gain: ±2, ±4, ±6 dB @ 10 kHz
- Volume Limiter: Selectable: 0 to -48 dB in 3 dB Steps
- Volume Lock:
- Selectable: 0 to -70 dB
- Limits Volume Adjustment Knob
- Selected Value Analogous to Volume Knob Increment
- Battery Life: 4-6 Hours (Continuous Use) with AA Batteries
- Dimensions: 3.9 x 2.6 x 0.9' / 9.9 x 6.6 x 2.3 cm
- Weight: 5.6 oz / 158.0 g without Batteries
- Shure SE425 Sound Isolating In-Ear Stereo Headphones (Clear):
- Earpiece:
- Design: In-Ear (Intra-Aural)
- General:
- Frequency Response: 20 Hz to 19 kHz
- Sensitivity: 109 dB
- Impedance: 22 Ohms
- Connectivity:
- Audio Connector: 1/8' / 3.5 mm TRS
- Connector Plating: Gold
- Included Adapter: 1/4'
- Cable:
- Detachable: Yes
- Cable Length: 5.3' / m
The Shure PSM1000 Dual-Channel Personal Monitor System is perfect for professionals in touring, stage events, or permanent installations. It comes with a P10T full-rack dual-channel wireless transmitter, two P10R+ wireless bodypack receivers, and two pairs of SE425 sound isolating earphones. The system also includes antennas, cables, a hardware rackmount kit, and other essential accessories. It offers features like network control via Ethernet, internal power supply, and compatibility with PSM 900 receivers. The P10R+ receiver enhances signal reception, and the Wireless Workbench 6 software allows for advanced RF spectrum plotting and frequency coordination. The system's dimensions are 1.7 x 19.0 x 13.5' / 4.3 x 48.3 x 34.3 cm, and it weighs 10.4 lb / 4.7 kg. The P10R+ receiver has dimensions of 3.9 x 2.6 x 0.9' / 9.9 x 6.6 x 2.3 cm and weighs 5.6 oz / 158.0 g without batteries.
