Shure P3TRA215TWP-G20 PSM300 Twinpack Pro Monitoring System - The Ultimate in Stage Monitoring
Are you a performer looking for a reliable and high-quality monitoring system? Look no further than the Shure PSM 300 Twin Pack Pro! This system is designed to provide you with crystal-clear sound and a seamless monitoring experience, so you can focus on delivering your best performance.
Features:
- • Exceptional Sound Quality: Enjoy 24-bit digital audio for clear, detailed sound and a patented audio reference companding that sounds more like wired.
- • Wireless Convenience: Send two channels of audio wirelessly to performers onstage with a solid analog RF connection over a 300' (90m) range.
- • Personalized Mixing: Create a personal mix from the body-pack with MixMode technology or stereo mode.
Specifications:
- • PSM 300 Monitor System: RF Carrier Range: 488-937.5 MHz, Compatible Frequencies Per band: up to 15, Tuning Bandwidth: 24 MHz maximum (varies by region), Operating Range Environment dependent: 90 m (300 ft), Audio Frequency Response: 38 Hz-15 kHz, Signal-to-Noise Ratio A-weighted: 90 dB (typical), Total Harmonic Distortion ref. ±34 kHz deviation @1 kHz: <0.5% (typical), Companding: Patented Shure Audio Reference Companding, Spurious Rejection ref. 12 dB SINAD: >80 dB (typical), Frequency Stability: ±2.5 ppm, MPX Pilot Tone: 19 kHz (±1 Hz), Modulation: FM, MPX Stereo (ref. ±34 kHz deviation @ 1 kHz), Operating Temperature: -18 °C (0 °F) to +63 °C (145 °F)
- • P3T Wireless Transmitter: RF Output Power: 10, 20, 30 mW (varies by region), RF Output Impedance 50 O (typical), Net Weight 783 g (27.6oz.), Dimensions 43 x 198 x 172 mm (1.7 x 7.8 x 6.8 in.), H x W x D, Power Requirements 12-15 V DC, 260 mA maximum, Audio Input Connector Type 6.35 mm (1/4') TRS, Polarity Tip positive with respect to ring, Configuration Electronically balanced, Impedance 40 kO (actual), Nominal Input Level Switchable, +4 dBu, -10 dBV, Maximum Input Level +4 dBu: +22 dBu, -10 dBV: +12.2 dBu, Pin Assignments Tip=hot, Ring=cold, Sleeve=ground, Phantom Power Protection Up to 60 V DC, Audio Output Connector Types 6.35 mm (1/4') TRS, Configuration Electronically balanced, Impedance Connected directly to inputs
- • P3R Wireless Body-pack Receiver: Active RF Sensitivity (at 20 dB SINAD): 2.2 microvolts, Image Rejection: >90 dB, Adjacent Channel Rejection: >60 dB, Intermodulation Attenuation: >50 dB, Blocking: >60 dB, Audio Output Power 1 kHz @ <1% distortion, peak power, @32 ohms: 80 mW (per output), Minimum Load Impedance: 16 ohms, Headphone output: 3.5 mm (1.8') stereo, Net Weigh:t 196 g (6.9 oz.) (with batteries), Dimensions: 99 x 66 x 23 mm (H x W x D), Battery Life (continuous use); 4-5.5 hours, AA batteries, 5.5-7 hours, SB900A battery, Performance: Frequency Range: G20: 488-512 MHz, RF Output Power: 10, 20, 30 mW (varies by region), RF Output Impedance: 50 Ohms (typical), Transmission Range: 300' (90 m), Audio Input Connector Type: 1/4' TRS (6.35 mm), Polarity: Tip positive with respect to ring, Configuration: Electronically balanced, Impedance: 40 kOhms (actual), Nominal Input Level: Switchable, +4 dBu, -10 dBV, Maximum Input Level: +4 dBu: +22 dBu, -10 dBV: +12.2 dBu, Pin Assignments: Tip=hot, Ring=cold, Sleeve=ground, Phantom Power Protection: Up to 60 VDC, Audio Output Connector Types: 1/4' TRS (6.35 mm), Configuration: Electronically balanced, Impedance: Connected directly to inputs, General Antenna: 1/4 wave, detachable, Power Requirement: 12 to 15 VDC, 260 mA maximum, Dimensions (H x W x D): 1.7inch x 7.8inch x 6.8inch, Net Weight: 27.6 oz
The Shure PSM 300 Twin Pack Pro is the ultimate monitoring solution for performers. It features a durable metal construction and comes in a multi-bodypack system-in-a-box. The included SE215 Sound Isolating earphones are designed for clear, precise stereo mixes on stage. The system offers exceptional sound quality, wireless convenience, and personalized mixing options. With a solid analog RF connection over a 300' (90m) range, you can enjoy crystal-clear sound without any interference. The PSM 300 Monitor System sends two channels of audio wirelessly to performers onstage, providing a seamless monitoring experience. The 24-bit digital audio ensures clear, detailed sound, while the patented audio reference companding sounds more like wired. The system also offers up to 90 dB signal-to-noise ratio and exceptionally wide stereo separation. The P3T Wireless Transmitter is a single channel, half-rack transmitter with an included rack mount kit. It sends a stereo or mono mix wirelessly to performers onstage with a rock-solid wireless connection to the P3R receiver over a 300' (90m) range. The P3R Wireless Body-pack Receiver is slim, lightweight, and durable. It features frequency scan and IR sync for quick and easy channel assignment, as well as MixMode technology for adjusting two independent monitoring mix levels. The system is powered by 2 AA batteries, providing up to 6 hours of continuous operation. The PSM 300 Twin Pack Pro is the perfect choice for performers who demand the best in stage monitoring. With its exceptional sound quality, wireless convenience, and personalized mixing options, you can focus on delivering your best performance without any distractions. Order yours today and experience the ultimate in stage monitoring!
