Shure P10TR+425CL-G10 PSM1000 Monitor System - The Ultimate Solution for Professional Audio
Discover the Shure P10TR+425CL-G10 PSM1000 Monitor System, a top-of-the-line audio solution for professionals. This dual-channel system includes a P10T full-rack dual-channel wireless transmitter, two P10R+ wireless bodypack receivers, two pairs of SE425 sound isolating earphones, antennas, and cables. It's perfect for touring, live events, and installations.
• Delivers pristine RF signal and audio quality for professional use
• Features network control via Ethernet and internal power supply
• Backwards compatible with PSM 900 receivers
In today's crowded RF environments, the 72 MHz tuning bandwidth provides flexibility. The P10R+ bodypack receiver scans for clean frequencies and offers a graphic spectrum plot. Wireless Workbench 6 software allows for advanced RF spectrum plotting and transmitter settings adjustment.
Features:
- 2 x P10R+ Wireless Bodypack Receivers
- 2 x SE425 Sound-Isolating Earphones
- Full-Rack 2-Channel Wireless Transmitter
- Networkable via Ethernet
- Bodypack Rechargeability
- 49 Compatible Frequencies per Band
- 72 MHz Tuning Bandwidth
- Includes Antennas and Cables
- Includes Power Supply and Rackmount Kit
Specifications:
- Shure P10T Full-Rack Dual-Channel Wireless Transmitter (G10: 470 To 542 MHz) Specs:
- RF Carrier Frequency Range: G10 - 70 to 542 MHz
- Compatible Frequencies: Per band - 39
- Tuning Bandwidth: 72 MHz
- Operating Range: 300' / 90 m (Environment dependent)
- Frequency Response: 35 Hz to 15 kHz (±1 dB)
- Signal to Noise Ratio: 90 dB (Typical) A-weighted
- Total Harmonic Distortion (THD): Ref. ±34 kHz deviation at 1 kHz <0.5% (Typical)
- Companding: Patented Shure audio reference companding
- Spurious Rejection: Ref. 12 dB SINAD - >80 dB (Typical)
- Frequency Stability: ±2.5 ppm
- MPX Pilot Tone: 19 kHz (±0.3 kHz)
- Modulation: FM (±34 kHz deviation at 1 kHz) MPX stereo ref.
- Operating Temperature: 0 to 135°F / -18 to 57°C
- Transmitter:
- RF Output Power: Selectable: 10, 50, 100 mW (+20 dBm)
- RF Output Impedance: 50 ohms (typical)
- Power Requirement:
- Input: 100 to 240 VAC, 50/60 Hz, 0.5 A max (5.5, with outlet loaded)
- Output: 100 to 240 VAC, 50/60 Hz, 5 A max, unswitched
- Audio Input: Combination XLR-1/4' /6.3 mm TRS
- Polarity:
- XLR: Non-inverting (Pin 2 positive with respect to pin 3)
- 1/4' / 6.3 mm: Tip positive with respect to ring
- Configuration: Electronically balanced
- Impedance: 70.2 kilohms (actual)
- Nominal Input Level: Switchable - +4 dBu, -10 dBV
- Maximum Input Level:
- +4 dBu: +29.2 dBu
- -10 dBV: +12.2 dBu
- Pin Assignments:
- XLR: 1=Ground, 2=Hot, 3=Cold
- 1/4' / 6.3 mm TRS: Tip=Hot, Ring=Cold, Sleeve=Ground
- Phantom Power Protection: Up to 60 VDC
- Audio Output:
- Connector Type: 1/4' / 6.3 mm TRS
- Configuration: Electronically balanced
- Impedance: Connected directly to inputs
- Physical Characteristics:
- Dimensions: 1.7 x 19.0 x 13.5' / 4.3 x 48.3 x 34.3 cm
- Weight: 10.4 lb / 4.7 kg
Shure P10R+ Wireless Bodypack Receiver (G10: 470 To 542 MHz) Specs:- Physical Characteristics:
- RF Filter Range: (Tri-band) -3 dB at 30.5 MHz from the center frequency of each band
- RF Gain: (Active) 31 dB (adjusts RF sensitivity to provide more RF dynamic range)
- RF Sensitivity: 2.2 μV (20 dB SINAD)
- Squelch Threshold: 22 dB SINAD (±3 dB), default setting
- Adjacent Channel Rejection: >70 dB
- Intermodulation Attenuation: >70 dB
- Blocking: >80 dB
- Image Rejection: >90 dB
- Audio Output Power: 100 mW per output (1 kHz @ <1% distortion, peak power, @ 16 ohms)
- Minimum Load Impedance: 4 ohms
- Output Impedance: <1 ohm
- 4-Band Parametric Equalizer:
- Low-Shelf Selectable Gain: ±2, ±4, ±6 dB @ 100 Hz
- Low-Mid Selectable Gain: ±2, ±4, ±6 dB @ 160, 250, 400, 500, 630 Hz
- Selectable Q: 0.7, 1.4, 2.9, 5.0, 11.5
- High-Mid Selectable Gain: ±2, ±4, ±6 dB @ 1, 1.6, 2.5, 4, 6.3 kHz
- High-Shelf Selectable Gain: ±2, ±4, ±6 dB @ 10 kHz
- Volume Limiter: Selectable - 0 to -48 dB in 3 dB steps
- Volume Lock:
- Selectable: 0 to -70 dB
- Limits volume adjustment knob
- Selected value analogous to volume knob increment
- Battery Life: 4-6 hours (continuous use) with AA batteries
- Dimensions: 3.9 x 2.6 x 0.9' / 9.9 x 6.6 x 2.3 cm
- Weight: 5.6 oz / 158.0 g without batteries
Shure SE425 Sound Isolating In-Ear Stereo Headphones (Clear) Specs:- Headphone:
- Wearing Style: Dual wired earbud with behind-ear cabling
- Earpiece Design: In-ear (intra-aural)
- Open/Closed-Back: Closed-back
- Sound Field: Stereo
- Number of Drivers: 2 per earpiece
- Driver Type: Dynamic
- Impedance: 22 ohms
- Active Noise Cancellation: No
- Volume Limiting / Child-Safe: No
- Built-In Mic: No
- Connectivity:
- Audio Connector: 1x 1/8' / 3.5 mm TRS
- Included Adapter: 1/4'
- Connector Plating: Gold
- Cable Design: Detachable / Straight
- Audio Connector to Earpiece: MMCX
- Cable Length: 5.3' / 1.6 m
- Physical:
The Shure P10TR+425CL-G10 PSM1000 Monitor System is a professional audio solution for touring, live events, and installations. It includes a dual-channel wireless transmitter, bodypack receivers, earphones, antennas, and cables. The system delivers pristine RF signal and audio quality, features network control via Ethernet, and is backwards compatible with PSM 900 receivers. The P10R+ bodypack receiver scans for clean frequencies and offers a graphic spectrum plot. Wireless Workbench 6 software allows for advanced RF spectrum plotting and transmitter settings adjustment. The system is easy to use and provides flexibility in today's crowded RF environments. It's perfect for professionals who demand high-quality audio. The Shure P10T full-rack dual-channel wireless transmitter has dimensions of 1.7 x 19.0 x 13.5' / 4.3 x 48.3 x 34.3 cm and weighs 10.4 lb / 4.7 kg. The Shure P10R+ wireless bodypack receiver has dimensions of 3.9 x 2.6 x 0.9' / 9.9 x 6.6 x 2.3 cm and weighs 5.6 oz / 158.0 g without batteries. The Shure SE425 sound isolating in-ear stereo headphones have a cable length of 5.3' / 1.6 m.
