Shure MXWAPT8-Z10 + P300-P Conferencing Bundle: Crystal-Clear Audio for Every Meeting
Upgrade your conferencing experience with the Shure MXWAPT8-Z10 + P300-P bundle. Enjoy natural voice quality and excellent speech intelligibility for seamless conferencing and presentations.
Key Features:
- • Immersive Audio: Delivers natural voice quality and outstanding speech intelligibility
- • Versatile Wireless: Offers a customizable, license-free AV conferencing system
- • Easy Setup: Simplifies the installation process
Shure MXWAPT8 8-Channel Access Point Transceiver
The MXWAPT8 is a bi-directional transceiver designed for Shure's Microflex wireless systems. It sends and receives up to 8 channels of AES 256-bit encrypted transmissions. The unit is wall and ceiling mountable with a paintable cover, and it's Ethernet compatible with PoE and Dante network support. You can connect additional units for up to 32 compatible channels.
Shure P300 IntelliMix Audio Conferencing Processor
The P300 IntelliMix processor works with the Microflex Wireless system. It provides eight channels of acoustic echo cancellation, DSP-processing, and level control. It supports Microflex wireless microphones and offers versatile input and output connectivity for speakers, computers, mobile devices, and more.
Benefits:
- • Enhanced Collaboration: Facilitates clear communication for effective collaboration
- • Professional Sound: Ensures high-quality audio for a professional touch
- • Flexible Configuration: Allows for customizable setups to meet your needs
Technical Specifications:
- Shure MXWAPT8 8-Channel Access Point Transceiver Specs:
- Network Interface: RJ45 - Gigabit Ethernet, Dante digital audio
- Plenum: Rating - UL 2043
- Power Requirement: Power over Ethernet (PoE) Class 0, 6.5 W
- Antenna Type: Internal, spatial naversity, circular polarization
- Housing: Molded plastic, cast zinc
- Dimensions: 1.35 x 6.70 x 6.70' (24 x 170 x 170 mm)
- Weight:
- Unit: 1.86 lb (845 g)
- Paintable Cover: 0.2 lb (85 g)
- Mounting Bracket: 0.15 lb (68 g)
- Shure P300 IntelliMix Audio Conferencing Processor Specs:
- Audio:
- Frequency Response: 0 Hz to 20 kHz (+1, -1.5 dB)
- Dante Digital Audio:
- Sampling Rate: 48 kHz
- Bit Rate: 24 Bit
- USB Audio:
- Sampling Rate: 48 kHz
- Bit Rate: 24 / 16 Bit
- Latency:
- Firmware 4.1 and Newer:
- Dante 1-8 In to Dante Out (AEC enabled): 15.4 ms
- Dante 1-8 In to Dante Out (AEC disabled): 8.7 ms
- Dante 9-10 In to Dante Out: 3.4 ms
- Analog In to Analog Out: 3.8 ms
- Firmware 3.1 and Older:
- Dante 1-8 In to Dante Out (AEC Enabled): 12.5 ms
- Dante 1-8 In to Dante Out (AEC Disabled): 5.8 ms
- Dante 9-10 In to Dante Out: 1.8 ms
- Analog In to Analog Out: 2.2 ms
- Acoustic Echo Cancelling: Tail Length - Up to 300 ms
- Analog Connections:
- Block Connectors
- Dynamic Range (20 Hz to 20 kHz, A-Weighted, Typical): Analog to Dante: 113 dB, Dante to Analog: 117 dB
- Equivalent Input Noise (20 Hz to 20 kHz, A-Weighted, Input Terminated with 150 Ohms): Line -86 dBV, Aux -98 dBV
- Total Harmonic Distortion at 1 kHz, 0 dBV Input, 0 dB Analog Gain: <0.05%
- Common Mode Rejection Ratio (150-Ohm Balanced Source @ 1 kHz): > 50 dB
- Input Impedance: 9.6 Kilohms
- Input Clipping Level: Line +27 dBV, Aux +15 dBV
- Output Impedance: 80 Ohms
- Output Clipping Level: Line +20 dBV, Aux +0 dBV, Mic -26 dBV
- Mobile:
- Connector: 1/8' / 3.5 mm
- Pin Assignments: Tip: Audio Input (Left), Ring 1: Audio Input (Right), Ring 2: Ground, Sleeve: Audio Output (To Phone)
- Dynamic Range (20 Hz to 20 kHz, A-Weighted, Typical): Analog to Dante: 99 dB, Dante to Analog: 90 dB
- Total Harmonic Distortion (at 1 kHz, 0 dBV Input, 0 dB Analog Gain): <0.05%
- Input Impedance: 3.7 Kilohms
- Input Clipping Level: +4 dBV
- Output Impedance: 1.4 Kilohms
- Output Clipping Level (Output Terminated with 2.2 Kilohms): -20 dBV
- General:
- Analog Input:
- 2 x 3-Pin Block Connector (Active Balanced)
- 1 x 1/8' / 3.5mm TRRS Input
- Control Software: Shure Designer
- Analog Output: 2 x 3-Pin Block Connector (Impedance Balanced)
- USB:
- USB 2.0, Type B
- Single Port Carries 2 Input and 2 Output Channels (Summed Mono)
- Network Connection:
- 1 x RJ45
- 10 x Dante Inputs
- 8 x Dante Outputs
- Networking:
- Cable Requirements: Cat 5e or Higher (Shielded Cable Recommended)
- Polarity: Non-Inverting, Any Input to Any Output
- Power Requirements: 802.3 at Type 2 (PoE Plus), Class 4
- Power Consumption: 17.5 W, Maximum
- Thermal Dissipation:
- Maximum: 17.5 W (60 BTU/Hr)
- Typical: 14.6 W (50 BTU/Hr)
- Operating Temperature Range: 20 to 122° F / -6.7 to 50° C
- Storage Temperature Range: -20 to 165° F / -29 to 74° C
- Dimensions: 1.6 x 8.3 x 8.9' / 4 x 21 x 22.6 cm
- Weight: 3.8 lb / 1.71 kg
This Shure MXWAPT8-Z10 + P300-P conferencing bundle is perfect for businesses and professionals who need high-quality audio for meetings and presentations. The MXWAPT8 transceiver is wall and ceiling mountable, with dimensions of 1.35 x 6.70 x 6.70' (24 x 170 x 170 mm) and weighs 1.86 lb (845 g) including the paintable cover and mounting bracket. The P300 processor has dimensions of 1.6 x 8.3 x 8.9' / 4 x 21 x 22.6 cm and weighs 3.8 lb / 1.71 kg. It's ideal for creating a professional audio setup in conference rooms, offices, and other meeting spaces.
