Shure MXCWAPT-A USA Wireless Access Point Transceiver - Superior Connectivity for Your Conference
• Manage up to 125 wireless conference units effortlessly with the Shure MXCWAPT-A Access Point Receiver. It's a crucial hub for the Microflex Complete Wireless Conference System, designed specifically for the US market.
• Enjoy seamless audio routing and frequency coordination. This device scans 2.4 and 5 GHz frequency bands to find the clearest channel, then communicates it to the conference units. It even uses DFS spectrum to expand channels and automatically resolves conflicts.
• Enhanced privacy is guaranteed with AES-128 encryption. Plus, it features a Dante networked audio connection for up to 10 input and 10 output channels, along with analog XLR audio input and output for easy connection of a wireless microphone or external sound reinforcement system.
Features:
- Controls up to 125 MXCW640 wireless conference units
- Bidirectional wireless connection provides audio to and from conference units and enables real-time control of all settings
- Operates in 2.4/5 GHz frequency bands, including DFS spectrum
- Automatic frequency coordination, interference detection and avoidance
- Dante digital audio (10 inputs/10 outputs)
- Analog audio input and output (XLR)
- One Ethernet cable for audio, control, and PoE power
- AES-128 encryption for enhanced privacy
- Display for basic system configuration without a laptop
- LEDs indicate power, wireless connection, and network status
- Includes wall/ceiling mounting plate
Specifications:
- Analog Audio Inputs:
- Maximum Input Level:
- 24.9 dBV (1% THD+N, Measured at Dante Output, Line Level, Analog Input Gain = 0 dB, Dante Output Gain = 0 dB)
- 10.3 dBV (1% THD+N, Measured at Dante Output, Aux Level, Analog Input Gain = 0 dB, Dante Output Gain = 0 dB)
- Frequency Response:
- 22 Hz to 20 kHz (+0.5 dB/-3 dB, Measured at Dante Output, -6 dBFS Input, Line Level, Analog Input Gain = 0 dB, Dante Output Gain = 0 dB)
- 22 Hz to 20 kHz (+0.5 dB/-3 dB, Measured at Dante Output, -6 dBFS Input, Aux Level, Analog Input Gain = 0 dB, Dante Output Gain = 0 dB)
- Total Harmonic Distortion/Noise:
- 0.03%, Typical (Measured at Dante Output, -6 dBFS Input, 1 kHz, Line Level, Analog Input Gain = 0 dB, Dante Output Gain = 0 dB, 22 Hz to 22 kHz BW)
- 0.02%, Typical (Measured at Dante Output, -6 dBFS Input, 1 kHz, Aux Level, Analog Input Gain = 0 dB, Dante Output Gain = 0 dB, 22 Hz to 22 kHz BW)
- Dynamic Range:
- 115 dB [A-Weighted, 113 dB (Unweighted), Typical Measured at Dante Output, Line Level, Analog Input Gain = 0 dB, Dante Output Gain = 0 dB, 22 Hz to 22 kHz BW]
- 112 dB [A-Weighted, 110 dB (Unweighted), Typical Measured at Dante Output, Aux Level, Analog Input Gain = 0 dB, Dante Output Gain = 0 dB, 22 Hz to 22 kHz BW]
- Equivalent Input Noise:
- Preamplifier:
- -92 dBV (A-Weighted, Typical Line Level, Analog Input Gain = 0 dB, 22 Hz to 22 kHz BW)
- -104 dBV (A-Weighted, Typical Aux Level, Analog Input Gain = 0 dB, 22 Hz to 22 kHz BW)
- Connector Type: XLR-3-Pin Female (Pin 1 = Ground, Pin 2 = Audio +, Pin 3 = Audio -)
- Analog Audio Outputs:
- Maximum Output Level: 4.3 dBV (1% THD+N, Audio Injected at Dante Input, Dante Input Gain = 0 dB, Analog Output Gain = 0 dB)
- Frequency Response: 1 Hz to 20 kHz (+0.5 dB/-3 dB), Audio Injected at Dante Input, -6 dBFS Input, Dante Input Gain = 0 dB, Analog Output Gain = 0 dB
- Total Harmonic Distortion/Noise: 0.01% (Typical, Audio Injected at Dante Input, -6 dBFS Input, 1 kHz, Dante Input Gain = 0 dB, Analog Output Gain = 0 dB, 22 Hz to 22 kHz BW)
- Dynamic Range (Typical): 100 dB [A-Weighted, 97 dB (Unweighted), Typical Audio Injected at Dante Input, Dante Input Gain = 0 dB, Analog Output Gain = 0 dB, 22 Hz to 22 kHz BW]
- Load Impedance: >600 Ohms, Typical
- Connector Type: 3-Pin XLR Male [Standard XLR Pinout (Pin 1 = Ground, Pin 2 = Audio +, Pin 3 = Audio -)]
- Ground Lift: XLR GND Lift Switch Position - 'Left (Pin 1-GND Connected) Right (Pin 1-GND Disconnected)'
- Equivalent Noise Level: -104 dBV [A-Weighted, Typical Aux Level, Analog Input Gain = 0 dB, 22 Hz to 22 kHz BW], Input Impedance 10 Kilohms Line Level
- Input Impedance:
- 10 Kilohms, Line Level
- 12 Kilohms, Aux Level
- Configuration: Balanced
- RF Specification:
- IEEE WLAN Standard: IEEE 802.11 a, g
- Frequency Bands: 2.4 GHz ISM, 5 GHz UNII
- Sensitivity: -80 dBm at 10% PER
- RF Output Power: 1 mW (Low), 5 mW (Medium), 13 mW (High), 25 mW (Maximum)
- Antenna Type: Proprietary Internal Bi-Level Dual-Band (PIFA), Patent Pending
- Power:
- Supply Type: Power over Ethernet (PoE) 802.2 af, Class 0 PD
- Supply Voltage: 37 to 57 V
- Power Consumption: 12.95 W Maximum, 6.5 W Typical
- Network:
- Interface: Gigabit Ethernet, Dante Digital Audio
- Link: Speed - 10/100/1000 Mb/s
- Network Addressing Capability: DHCP or Manual IP Address
- Cable Length: 328' / 100 m Maximum
- Cable Type: Cat 5e or Higher
- Display:
- Type: Monochrome FFSTN LCD
- Display Size: 1.84 x 0.074' / 46.7 x 18.8 mm
- Display Resolution: 152 x 78 (78 ppi)
- General:
- Housing: Molded Plastic, Die-Cast Aluminum
- Mounting: Ceiling Bracket or Wall
- Operating Temperature Range: 19.4 to 120.2° F / 7 to 49° C
- Storage Temperature: -20.2 to 140° F / -29 to 60° C
- Dimensions: 1.88 x 9.55 x 9.52' / 47.8 x 242.5 x 241.8 mm
- Weight: 2.54 lb / 1.15 kg
The Shure MXCWAPT-A Wireless Access Point Transceiver is a must-have for conference organizers and professionals seeking top-notch audio connectivity. It serves as a central hub for the Microflex Complete Wireless Conference System in the US. With dimensions of 1.88 x 9.55 x 9.52 inches (47.8 x 242.5 x 241.8 mm) and a weight of 2.54 lb (1.15 kg), it's compact and easy to install. It can be mounted on the wall or ceiling using the included bracket or placed on a table for temporary meetings. Ideal for managing audio routing, frequency coordination, and system control for up to 125 wireless conference units, it ensures seamless communication and high-quality audio in any conference setting.
