Shure MXA310AL-P300-P Conference Bundle - Aluminium
Elevate your audio / video conferencing with the Microflex Advance MXA310 Table Array Microphone and the IntelliMix P300-IMX Audio Conferencing Processor. Enjoy natural voice quality and excellent speech intelligibility.
Shure MXA310AL
• 4 separate polar patterns plus a new toroid pattern to reject overhead noise
• Intuitive interface for easy preset, template, and polar pattern configuration
P300-IMX
• Predefined matrix and presets for quick setup
• Discrete form factor for versatile installations
• Connectivity options for various devices
Features:
- Shure MXA310AL:
- Audio Capture / DSP:
- Up to four simultaneous polar patterns including the innovative “toroid” pattern, capturing audio from table level while rejecting unwanted overhead artifacts (additional patterns include Omnidirectional, Cardioid, Supercardioid, Hypercardioid, and Bidirectional all steerable to any angle in 15 degree increments)
- Shure DSP Utilities:
- Steerable Coverage Technology
- Automatic Mixing
- 4 Band C/S PEQ assignable to any one channel at a time
- Software Control:
- Browser-based control software that features a simple yet smart interface showing templates and varying polar patterns for all device parameters
- Stores 10 presets
- Connectivity:
- Dante Audio Networking, standard PoE (class 0), and Control carried on single Ethernet cable
- Control strings for third-party preset controllers including Crestron and AMX
- Hardware / Installation:
- Configurable multi-color LED:
- Displays Mute and Unmute status in Ring, Segment or Automix in two colors (available in red, orange, yellow, green, blue, purple, white, pink)
- Brightness controls (default, dim, disabled)
- Mute Switch modes:
- Toggle, Push-to-Talk, Push-to-Mute, Disable
- Backlit LED indicator of enabled/disabled mute switch
- Generates external control signal to mute a downstream device or trigger camera presets
- Available in white, black and aluminum
- CommShield RF Immunity
- Cable exit along or through table allows for easy retrofitting of previous Shure MX396/MX395 boundary microphone installations
- Device Reboot/Factory Reset Options:
- Two stage hardware reset: 4 second press resets network settings, 8 second press resets to factory default restoring all settings including device name and network details
- P300-IMX:
- Connects 10 Dante audio inputs, 2 analog inputs, USB and a mobile device to an AV conferencing system or a PC-based videoconferencing application
- Includes Shure developed DSP algorithms to enhance audio quality in AV conferences: 8 channels of microphone processing featuring AEC, noise reduction, and automatic gain control, IntelliMix automatic mixing, matrix mixing, delay, compressor and PEQ
- Flexible signal routing and connectivity: analog audio (2 block in / 2 block out) to connect to room AV conferencing system; USB (1 in/out) to connect to laptop or room PC; one 3.5 mm TRRS jack to connect to a mobile device to enable an additional participant to join
- Power-over-Ethernet (PoE+) eliminates the need for an outboard power supply
- Compact form factor is easy to mount without equipment rack
Specifications:
- Shure MXA310AL:
- Polar Pattern:
- All channels independently adjustable
- Cardioid, Hypercardioid, Supercardioid, Toroid, Omnidirectional, Bidirectional
- Connector Type: RJ45
- Power Requirements: Power over Ethernet (PoE), Class 0
- Power Consumption: 4W, maximum
- Weight: 362 g (0.8 lbs)
- Dimensions: H x W x D: 3.6 x 13.4 x 13.4 cm (1.4 x 5.3 x 5.3 in.)
- Control Application: HTML5 Browser-based
- Operating Temperature Range: 6.7°C (20°F) to 40°C (104°F)
- Storage Temperature Range: 29°C (-20°F) to 74°C (165°F)
- Audio:
- Frequency Response: 100 to 20,000 Hz
- Dante Digital Output:
- Channel Count: 5 total channels (4 independent transmit channels, 1 Automatic mixing transmit channel)
- Sampling Rate: 48 kHz
- Bit Depth: 24
- Sensitivity: At 1 kHz, -15 dB Gain Setting: -21 dBFS/Pa
- Maximum SPL: 1 kHz at 1% THD, -15 dB Gain Setting: 115.2 dB SPL
- Signal-To-Noise Ratio:
- Ref. 94 dB SPL at 1 kHz, -15 dB Gain Setting:
- Cardioid: 75 dB
- Toroid: 67 dB
- Latency: Not including Dante latency: <1 ms
- Self Noise:
- -15 dB Gain Setting:
- Cardioid: 19.2 dB SPL-A
- Toroid: 26.8 dB SPL-A
- Dynamic Range:
- -15 dB Gain Setting:
- Cardioid: 96 dB
- Toroid: 90 dB SPL
- Built-in Digital Signal Processing:
- Per Channel Equalizer (4-band Parametric), Mute, Gain (140 dB range)
- System Automatic mixing, Low-Cut Filter (-12 dB/octave @150 Hz)
- Networking: Cable Requirements: Cat 5e or higher (shielded cable recommended)
- P300-IMX:
- General:
- Input: (2) 3-pin block connector (Active Balanced)
- Output: (2) 3-pin block connector (Impedance Balanced)
- Mobile: (1) TRRS 3.5 mm (1/8')
- USB Connections:
- (1) USB 2.0, Type B
- Single port carries 2 input and 2 output channels (Summed mono)
- Network Connections (Dante Digital Audio):
- (1) RJ45
- 10 Dante Inputs, 8 Dante Outputs
- Polarity: Non-inverting, any input to any output
- Power Requirements: 802.3 at Type 2 (PoE Plus), Class 4
- Power Consumption: 17.5 W, maximum
- Weight: 1710 g (3.8 lbs)
- Dimensions: H x W x D: 4 x 21 x 22.6 cm (1.6 x 8.3 x 8.9 in.)
- Control Software: Shure Designer
- Operating Temperature Range: 6.7°C (20°F) to 50°C (122°F)
- Storage Temperature Range: 29°C (-20°F) to 74°C (165°F)
- Thermal Power Dissipation:
- Maximum: 17.5 W (60 BTU/hr)
- Typical: 14.6 W (50 BTU/hr)
- Audio:
- Frequency Response: +1, -1.5 dB, 20 to 20,000 Hz
- Dante Digital Audio:
- Dante Digital Audio Sampling Rate: 48 kHz
- Bit Depth: 24
- USB Audio
- Sampling Rate: 48 kHz
- Bit Depth: 16, 24
- Latency:
- Firmware 4.1 and newer:
- Dante 1-8 in to Dante out (AEC enabled): 15.4 ms
- Dante 1-8 in to Dante out (AEC disabled): 8.7 ms
- Dante 9-10 in to Dante out: 3.4 ms
- Analog in to Analog out: 3.8 ms
- Firmware 3.1 and older:
- Dante 1-8 in to Dante out (AEC enabled): 12.5 ms
- Dante 1-8 in to Dante out (AEC disabled): 5.8 ms
- Dante 9-10 in to Dante out: 1.8 ms
- Analog in to Analog out: 2.2 ms
- Analog Connections (Block Connectors):
- Dynamic Range (20 Hz to 20 kHz, A-weighted, typical):
- Analog-to-Dante: 113 dB
- Dante-to-Analog: 117 dB
- Equivalent Input Noise (20 Hz to 20 kHz, A-weighted, input terminated with 150 ):
- Line: -86 dBV
- Aux: -98 dBV
- Total Harmonic Distortion: @ 1 kHz, 0 dBV Input, 0 dB analog gain: <0.05%
- Common Mode Rejection Ratio: 150 balanced source @ 1 kHz: >50 dB
- Input Impedance: 9.6 kΩ
- Input Clipping Level:
- Line: +27 dBV
- Aux: +15 dBV
- Output Impedance: 80 Ω
- Output Clipping Level:
- Line: +20 dBV
- Aux: +0 dBV
- Mic: -26 dBV
- Mobile Connection (3.5 mm Connector):
- Pin Assignments:
- Tip: Audio Input (Left)
- Ring 1: Audio Input (Right)
- Ring 2: Ground
- Sleeve: Audio Output (To Phone)
- Dynamic Range (20 Hz to 20 kHz, A-weighted, typical):
- Analog-to-Dante: 99 dB
- Dante-to-Analog: 90 dB
- Equivalent Input Noise (20 Hz to 20 kHz, A-weighted, input terminated with 20 ): -95 dBV
- Total Harmonic Distortion (@ 1 kHz, 0 dBV Input, 0 dB analog gain): <0.05%
- Input Impedance: 3.7 kΩ
- Input Clipping Level: +4 dBV
- Output Impedance: 1.4 kΩ
- Output Clipping Level (Output terminated with 2.2 kΩ): -20 dBV
- Networking:
- Cable Requirements: Cat 5e or higher (shielded cable recommended)
This Shure MXA310AL-P300-P bundle is perfect for businesses and professionals who need high-quality audio for their video conferences. The MXA310AL microphone has 4 polar patterns and a toroid pattern to reduce overhead noise. The P300-IMX processor has presets for easy setup. Together, they deliver natural voice and excellent speech intelligibility. The MXA310AL weighs 0.8 lbs and has dimensions of 1.4 x 5.3 x 5.3 in. The P300-IMX weighs 3.8 lbs and has dimensions of 1.6 x 8.3 x 8.9 in.
