Shure DL4B/O-LM1-A DuraPlex Omnidirectional Lavalier Microphone - Black with 1-Pin LEMO Connector
Conquer any situation! The DuraPlex subminiature DL4 wireless lavalier microphone is your reliable partner for capturing clear audio in all conditions. Whether it's for film, broadcast, speech, theater, or performance, this microphone delivers professional-quality sound. It's built to withstand dust, dirt, water, and sweat, making it perfect for both everyday use and the toughest environments like broadcast audio and film sound.
Features:
- • 5 mm omnidirectional design for discrete placement and great sound quality
- • IP57 rated for dust and waterproof protection
- • Advanced 1.6 mm Shure Plex cable with dual redundant ground for long-lasting use
- • Presence Cap for enhanced vocal clarity (3-4 dB boost near 10 kHz)
- • Available in four colors, including Black
- • Available in two connector types, LEMO
Specifications:
- • Microphone Capsule: MEMS
- • Polar Pattern: Omnidirectional
- • Frequency Response: 20 Hz to 20 kHz
- • Sensitivity: –42.5 dBV (7.5 mVRMS) @ 1 kHz
- • Self-Noise: 31 dB SPL-A A-weighted, Equivalent Acoustical
- • Signal-to-Noise Ratio: 63 dB
- • Maximum SPL: 132.0 dB SPL 1 kHz @ 1% THD, typical
- • Dynamic Range: 101.0 dB Typical
- • Microphone Current Draw: 220 μA, maximum
- • Bias Voltage Recommended Operating Voltage: 5 VDC
- • Housing: Molded ABS
- • Polarity: Positive pressure on diaphragm produces positive voltage on Pin 3 with respect to Pin 1
- • Cable Diameter: 1.6 mm
- • Cable Length: 66.0 in (1.67 m)
- • Net Weight: 15.0 g (0.53 oz)
- • Capsule Dimensions (L ¡Á D): 14.5 mm ¡Á 5.2 mm
The Shure DL4B/O-LM1-A DuraPlex Omnidirectional Lavalier Microphone is perfect for professionals in film, broadcast, speech, theater, and performance. With its 5 mm omnidirectional design, it can be discretely placed for great sound quality. It's IP57 rated, resistant to dust and water. The advanced 1.6 mm Shure Plex cable has dual redundant ground for long-lasting use. It comes in four colors, including Black, and two connector types, LEMO. The microphone capsule is MEMS, with an omnidirectional polar pattern, frequency response from 20 Hz to 20 kHz. It has a sensitivity of –42.5 dBV (7.5 mVRMS) @ 1 kHz, self-noise of 31 dB SPL-A A-weighted, and a signal-to-noise ratio of 63 dB. Maximum SPL is 132.0 dB SPL 1 kHz @ 1% THD, typical. The dynamic range is 101.0 dB typical. Microphone current draw is 220 μA maximum, with a recommended operating voltage of 5 VDC. The housing is molded ABS. It has a cable diameter of 1.6 mm, length of 66.0 in (1.67 m), net weight of 15.0 g (0.53 oz), and capsule dimensions of 14.5 mm x 5.2 mm.
