Shure Axient AD4Q-DC Four-Channel Digital Wireless Receiver - A Band - The Ultimate Solution for Seamless Audio
Experience a new standard in transparent digital audio and maximum spectral efficiency with the AD4Q Axient Digital Quad Receiver. This groundbreaking receiver offers:
- • Exceptional Performance: Wide tuning, low latency, High Density (HD) mode, and Quadversity ensure solid performance even in the most challenging RF environments.
- • Advanced Control: Networked control, AES3 + AES67 + Dante, and signal routing options bring a new level of management and flexibility to your entire workflow.
- • Compatibility: Works seamlessly with all Axient Digital transmitters.
With features like DC Power Module support, wide tuning range, true digital diversity reception, and more, this receiver is a must-have for professionals seeking top-notch audio quality.
Features:
- DC Power Module supports backup power sources and remote operation
- Wide tuning range up to 184MHz
- True digital naversity reception per channel for drop-out resistance
- Networked control with Wireless Workbench and ShurePlus Channels app
- Quadversity mode for extended antenna coverage and improved RF signal-to-noise
- Front panel headphone jack enables Dante Cue and Dante Browse monitoring
- Configurable Ethernet switch for redundant Dante digital output
- Switchable XLR/AES3 outputs
- Channel Quality meter displays RF signal-to-noise
- Locking AC connectors
- Optional DC module available to support redundant power
Specifications:
- Dimensions (H ¡Á W ¡Á D):
- 1.7 ¡Á 19.0 ¡Á 13.1 in
- (44 ¡Á 483 ¡Á 333 mm)
- Weight: 10.6 lb (4.8 kg) without antennas
- Housing: Steel; extruded aluminum
- Power Requirements:
- 100 to 240 VAC, 50–60 Hz
- 0.68 A max
- Thermal Dissipation:
- Maximum: 23 W (78 BTU/hr)
- Idle: 15 W (6)
- DC Input Voltage Range: 10.9–14.8 V DC
- Maximum DC Input Current: 4.0 A
- Protection Modes: Overvoltage, Undervoltage, Reverse Polarity
- 4-Pin XLR:
- Pin 1: Negative; Pin 2: No Connection
- Pin 3: No Connection; Pin 4: Positive
- Audio Output:
- Gain Adjustment Range: –18 to +42 dB in 1 dB steps (plus Mute setting)
- Configuration:
- 1/4' (6.35 mm): Transformer-coupled Balanced (Tip=audio, Ring=no audio, Sleeve=ground)
- XLR: Transformer-Coupled Balanced (1=ground, 2=audio +, 3=audio –)
- Impedance (Typical, XLR Line Out) 100 Ω
- Full Scale Output (200 kΩ load):
- 1/4' (6.35 mm): +8 dBV
- XLR (LINE setting): +18 dBV
- XLR (MIC setting): –12 dBV
- Mic/Line Switch: 30 dB pad
- Phantom Power Protection: Yes
- Networking:
- Network Interface: 10/100 Mbps, 1 Gbps, Dante Digital Audio
- Network Addressing Capability: DHCP or Manual IP address
- Maximum Cable Length: 100 m (328 ft)
- Cascade Output:
- Connector Type: BNC
- Configuration: Unbalanced, passive
- Impedance: 50 Ω
- Insertion Loss: 0 dB, typical
- RF Input:
- Spurious Rejection: >80 dB, typical
- Connector Type: BNC
- Impedance: 50 Ω
- Bias Voltage: 12-13.5 VDC, 150 mA maximum, per antenna, switchable on/off
- RF Carrier Frequency Range: A: 470 to 636 MHz
The Shure Axient AD4Q-DC Four-Channel Digital Wireless Receiver - A Band is designed for professionals in the audio industry. Whether you're in a live performance venue, a recording studio, or a broadcast setting, this receiver provides seamless audio connectivity. It has a compact size of 1.7 x 19.0 x 13.1 inches (44 x 483 x 333 mm) and weighs 10.6 lb (4.8 kg) without antennas. With its wide range of features and compatibility with Axient Digital transmitters, it's the perfect choice for delivering high-quality audio in any situation.
