Shure Axient AD4DNP C Band Two-Channel Digital Wireless Receiver - Superior Performance
Experience a new standard in digital audio with the Axient AD4D. It offers transparent digital audio and maximum spectral efficiency. • Wide tuning range up to 184MHz for versatile use. • True digital diversity reception per channel, ensuring no drop-outs. • Networked control with Wireless Workbench and ShurePlus Channels app for easy management. This receiver is perfect for professionals in challenging RF environments, bringing flexibility to your workflow. Compatible with all Axient Digital transmitters.
Features:
- Wide tuning range up to 184MHz
- True digital naversity reception per channel for drop-out resistance
- Networked control with Wireless Workbench and ShurePlus Channels app
- Front panel headphone jack enables Dante Cue and Dante Browse monitoring
- Configurable Ethernet switch for redundant Dante digital output
- AES3 output
- Channel Quality meter displays RF signal-to-noise
- Locking AC connectors
- Optional DC module available to support redundant power
Specifications:
- Dimensions: 44 mm × 483 mm × 333 mm (1.7 in. × 19.0 in. × 13.1 in.), H × W × D
- Weight: 4.6 kg (10.1 lbs), without antennas
- Housing: Steel; Extruded aluminum
- Power Requirements: 100 to 240 V AC, 50–60 Hz; 0.26 A max.
- Thermal Dissipation:
- Maximum: 23 W (78 BTU/hr)
- Idle: 15 W (52 BTU/hr)
- Audio Output:
- Gain Adjustment Range: –18 to +42 dB in 1 dB steps (plus Mute setting)
- Configuration:
- 1/4' (6.35 mm): Transformer-coupled Balanced (Tip=audio, Ring=no audio, Sleeve=ground)
- XLR: Transformer-coupled Balanced (1=ground, 2=audio +, 3=audio -)
- Impedance (Typical, XLR Line out): 100Ω
- Full Scale Output (200 kΩ load):
- 1/4' (6.35 mm): +8 dBV
- XLR: LINE setting= +18 dBV, MIC setting= –12 dBV
- Mic/Line Switch: 30 dB pad
- Phantom Power Protection: Yes
- Networking:
- Network Interface: 10/100 Mbps, 1 Gbps, Dante Digital Audio
- Network Addressing Capability: DHCP or Manual IP address
- Maximum Ethernet Cable Length: 100 m (328 ft)
- Cascade output:
- Connector Type: BNC
- Configuration: Unbalanced, passive
- Impedance: 50 Ω
- Insertion Loss: 0 dB, typical
- RF Input:
- Spurious Rejection: >80 dB, typical
- Connector Type: BNC
- Impedance: 50 Ω
- Bias Voltage: 12–13.5 V DC, 150 mA maximum, per antenna, switchable on/off
- RF Carrier Frequency Range: C: 750–960 MHz
The Shure Axient AD4DNP C Band Two-Channel Digital Wireless Receiver is designed for professionals in challenging RF environments. It offers a wide tuning range, true digital diversity reception, and networked control. With dimensions of 44 mm × 483 mm × 333 mm (1.7 in. × 19.0 in. × 13.1 in.) and a weight of 4.6 kg (10.1 lbs) without antennas, it's easy to install and use. Ideal for live events, broadcasts, and more, this receiver brings flexibility to your audio workflow.
