Shure A15HP High-Pass Filter - Your Audio Frequency Solution
• Balanced XLR in-line high pass filter that significantly reduces low frequencies below 100 Hz.
• This filter effectively rolls off low audio frequencies to eliminate 60 Hz electrical hum, low-frequency wind noise, air conditioner noise, or stand-and floor-transmitted low-frequency vibrations.
• When loaded with a low-impedance microphone input (800 ohms or more), the rolloff is 12 dB per octave below 100 Hz. When loaded with 150 ohms, the rolloff is 3 dB at 100 Hz. The output is flat above the rolloff point (with a maximum loss of 0.5 dB at 1 kHz). This high-quality filter ensures crystal-clear audio for your recordings or live performances.
SPECIFICATIONS
- Frequency Response
- Flat above rolloff point; -0.5 dB maximum at 1 kHz
- Impedance
- Distortion
- 2.5% maximum (100 mV, open circuit voltage)
- Connectors
- Input: XLR, female
- Output: XLR, male
- Housing
- Full magnetic shield, steel with gray enamel finish
- Dimensions
- 19 mm (.75in. diameter); 114 mm (4.5in. long)
The Shure A15HP High-Pass Filter is a must-have for audio enthusiasts, sound engineers, and musicians. Use it in recording studios, live performances, or any audio setup to reduce unwanted low frequencies. It features a balanced XLR in-line design, reducing frequencies below 100 Hz. This helps eliminate 60 Hz electrical hum, low-frequency wind noise, and vibrations. With an EIA rated impedance of 150 Ω, it offers excellent performance. The housing is a full magnetic shield, steel with a gray enamel finish. It measures 19 mm (0.75in. diameter) and 114 mm (4.5in. long). Keep your audio clear and crisp with the Shure A15HP High-Pass Filter.
