Martin VDO Fatron 20 320mm LED Video Batten
Level up your creative VDO toolbox! It's now bigger, more dynamic, and incredibly flexible, making your P3 System Controller even more versatile.
VDO Fatron 20 is a 20 mm pixel pitch outdoor-rated LED video batten. With a wide range of optical accessories, it offers diverse looks for 3D stage designs. You can easily do video-mapping and creatively mix it with other Martin LED video products via the P3 System Controller. It shares the same integrated power and data cabling as VDO Sceptron and VDO Dotron, simplifying installation. Be creative!
- Expand your creative VDO toolbox for amazing 3D stage setups
- Choose from a variety of field-exchangeable diffusers and lenses for different looks
- Set up, map, and configure easily via P3 System Controller
Features:
- Supported by integrated power and data processor (P3 PowerPort 1500 or P3 PowerPort 1000 IP) and simple cabling
- Combined power and data cabling (compatible with VDO Sceptron and VDO Dotron)
- P3/DMX/RDM controllable (automatic protocol detection)
- Wide range of built-in effects
- Intuitive mapping and addressing via P3 System Controller
- Fully brightness and color calibrated for consistent colors between products
- Pixel-level brightness and color calibrated for a uniform look
- High-quality 16-bit per color image processing
- 20 mm pixel pitch
- 500 cd per meter calibrated
- 1500 lumen per meter calibrated
- 8 diffuser options + 1 lens option (all field-exchangeable)
- IP65 rated for outdoor use
- Versatile rigging accessories
- Length: 1000 mm
Specifications:
- Physical
- Length: 1000 mm (39.4 in.)
- Width: 80 mm (3.15 in.)
- Height without front: 28 mm (1.10 in.)
- Height with standard front (Square Diffuser): 48 mm (1.89 in.)
- Weight without front: 2.5 kg (5.6 lbs.)
- Weight with standard front (Square Diffuser): 2.8 kg (6.2 lbs.)
- Control and Programming
- Control options: Martin P3 System Controller (via Martin P3 PowerPort) or DMX
- Protocol detection: Automatic
- Control modes: RGB, basic, segment, and pixel-level
- Setting and addressing: Martin P3 System Controller or RDM-compliant controller
- Control resolution: 16-bit (P3) or 8-bit (DMX) per color
- Color and intensity calibration: Pixel-level
- DMX compliance: USITT DMX512-A
- RDM compliance: ANSI/ESTA E1.20
- Firmware update: Via Martin P3 System Controller
- DMX channels: 3/10/37/157
- Control/User Interface
- Device status: Multi-color visual indication
- Device test and reset: Magnetic pushbutton for local test patterns and reset
- Optics
- Minimum LED lifetime: 50,000 hours (to >70% luminous output)*
- *Figure obtained under manufacturer's test conditions.
- Options
- Open Front
- Flat Diffuser
- Smoked Flat Diffuser
- Round Diffuser
- Smoked Round Diffuser
- Square Diffuser (standard with fixtures)
- Smoked Square Diffuser
- NoBlend Diffuser
- Smoked NoBlend Diffuser
- Lens Array Narrow
- All optical accessory options are interchangeable and clip onto fixtures
- Photometric Data
- Color resolution: 16 bits per color (48 bits per pixel)
- Viewing angle: 120° x 120°
- LED arrays: 4 x 50
- Pitch (pixel center-to-center): 20.00 mm
- Luminous intensity, calibrated mode: 500 cd per meter
- Total output, calibrated mode: 1500 lumens per meter
- Total output, calibrated mode: 6250 nits
- Video Processing
- Brightness control
- Gamma correction and control
- Color temperature control
- Color space control
- Calibration processing
- Synchronization
- Signal Protocol
- Martin P3 (via Martin P3 PowerPort) or DMX (direct)
- Installation
- Orientation: Any
- Mounting: Channel for M6 captive nuts on back of profile
- Mounting options: M6 bolts, optional sliding bracket (accepts M12 bolt)
- Connections
- Power and data input: 6-pin custom (BBD) IP66-rated
- Power and data thru: 6-pin custom (BBD) IP66-rated
- Hot plugging compatible
- Electrical
- Nominal input voltage: 48 VDC +/- 4%
- Maximum power consumption, all LEDs at full intensity, VDO Fatron 20, 1000 mm: 60 W
- Power supply options: Martin P3 PowerPort 1500, Martin P3 PowerPort 1000 IP, Martin IP66 PSU 240W or generic 48 VDC PSU
- Thermal
- Cooling: Convection
- Maximum ambient temperature (Ta max.) for typical video content: 45° C (113° F)
- Minimum ambient temperature (Ta min.): -20° C (-4° F)
- Max. total heat dissipation, calculated, +/- 10%: 205 BTU/h
- Approvals
- EU safety: EN 60950-1, EN 60950-22, EN 62471
- EU EMC: EN 55024, EN 55032
- US safety: UL 60950-1, UL 60950-22
- US EMC: CFR Title 47 Part 15 Class A
- Canadian safety: CSA C22.2 No. 60950-1, No. 60950-22
- Canadian EMC: ICES-003 Class A
- Australia/NZ: RCM
This Martin VDO Fatron 20 1000mm Outdoor LED Video Batten is perfect for stage designers and lighting professionals. It has a length of 1000mm, width of 80mm, and weighs 2.5kg without the front and 2.8kg with the standard front. Use it for 3D stage designs, easily connect and control it with the P3 System Controller, and choose from various diffusers and lenses for different looks.
