Martin 310 RGBW Color Mixing Exterior Wash Light - 10 Degree - EU Version - Aluminum
Illuminate large structures, building facades, and bridges with the Martin Exterior Wash 310! This powerful, compact, and energy-efficient LED lighting fixture is a game-changer. It features a sleek design with an optional snoot for a discreet look. The built-in display makes it easy to use, and it offers a wide range of beam angles. Plus, it's fully IP-rated for permanent outdoor use.
With its superior color mixing capabilities based on quad-color premixed LEDs, the Exterior Wash 310 is perfect for creating stunning lighting effects.
Key Features:
- Powerful premixed LEDs for bright illumination
- Up to 8300 lumens at full white (RGBW) for maximum brightness
- Six different beam angle options for versatile lighting
Benefits:
- Internal power and control (DMX, RDM, and OLED display) for easy operation
- Rugged IP66 housing for durability in outdoor conditions
- 0 - 100% intensity control for precise lighting adjustments
Specifications:
- Physical:
- Length: 283 mm (11.2 in.)
- Width: 404 mm (15.9 in.)
- Height: 439 mm (17.3 in.)
- Weight: 19.0 kg (42.0 lbs.)
- Dynamic Effects:
- Intensity: 0 - 100%
- Color mixing: RGBW
- Control and Programming:
- Control systems: DMX, RDM
- Stand-alone control: Up to 20 scenes with global fade/hold times
- Setting, addressing, standalone programming: Control panel with OLED display
- DMX channels: 3 - 5 depending on DMX mode
- Receiver: RS-485
- DMX compliance: USITT DMX512-A
- Firmware update: Serial upload via DMX link
- Optics:
- Light source: 30 x RGBW quad-color LEDs
- Minimum LED lifetime: 50,000 hours (to >70% luminous output)
- LED manufacturer: Cree
- Beam Angle Options:
- No diffuser: 11°
- Narrow diffuser: 13°
- Medium diffuser: 27°
- Wide diffuser: 43°
- Very wide diffuser: 62°
- Asymmetric diffuser: 66° x 15°
- Binning: Tight color and flux binning
- Calibration: Full Gamut Color Calibration
- Photometric Data:
- CRI (Color Rendering Index): > 70
- CCT: 6500 K (White LED)
- Total luminous output: 8300 lumens
- Construction:
- Housing: Cast aluminum
- Color: Light grey
- Ingress protection rating: IP66
- Surface treatment: Anodized and electrostatic powder-coated
- Effective Projected Area (EPA): 0.14 m2 including snoot
- Impact resistance: IK08 (with control panel display cover plate installed)
- Corrosion resistance: C5-M (very high corrosivity / marine, ISO 12944)
- Vibration resistance: 1.0g, Sinusoidal (IEC 60068-2-6)
- 0.7g RMS Random (IEC 60068-2-64)
- Installation:
- Mounting: Adjustable yoke
- Orientation: Any
- Minimum distance to illuminated surfaces: 0.2 m (0.6 ft.)
- Connections:
- Power connection: 1.8 m (5.9 ft.) cable tail without connector
- Power input cable type, EU models: H05RN-F 300/500V, 3 x 0.75 mm2, 7 mm
- Power input cable type, US models: SJOW 18AWG, 300V, WL F1, 8 mm
- Data connection: 1.8 m (5.9 ft.) open ended 5-conductor combined input + output cable tail
- All cable entries: IP68 cable gland
- Electrical:
- AC power: 100 - 240 / 277 V nominal, 50/60 Hz
- Power supply unit: Integrated, auto-sensing multi-voltage
- Power Consumption: 7 W (steady state, all LEDs at zero intensity)
- Typical half-cycle RMS inrush current: 10.9 A
- Maximum total power consumption: 300 W
- Surge protection: 4 KV
- Max earth leakage: 0.25 mA
- Typical Power and Current:
- 100 V, 60 Hz: 2.7 A, 270 W, PF 0.99
- 120 V, 60 Hz: 2.3 A, 265 W, PF 0.99
- 230 V, 50 Hz: 1.2 A, 260 W, PF 0.98
- 277 V, 60 Hz: 1.0 A, 260 W, PF 0.95
- Thermal:
- Cooling: Convection
- Maximum ambient temperature (Ta max.): 45°C (113°F)
- Minimum ambient temperature (Ta min.): -30°C (-22°F)
- Maximum surface temperature, steady state, at 40°C ambient: 70°C (158°F)
- Total heat dissipation (calculated, +/- 10%): 945 BTU/hr
The Martin Exterior Wash 310 is a must-have for lighting large structures, building facades, and bridges. It's perfect for professionals and contractors looking for a powerful, compact, and energy-efficient lighting solution. With its sleek design and optional snoot, it provides discreet illumination. The built-in display makes it easy to use, and the wide range of beam angles allows for versatile lighting. Here are the key details: - **Physical Dimensions**: - Length: 283 mm (11.2 in.) - Width: 404 mm (15.9 in.) - Height: 439 mm (17.3 in.) - Weight: 19.0 kg (42.0 lbs.) - **Dynamic Effects**: - Intensity: 0 - 100% - Color mixing: RGBW - **Control and Programming**: - Control systems: DMX, RDM - Stand-alone control: Up to 20 scenes with global fade/hold times - Setting, addressing, standalone programming: Control panel with OLED display This lighting fixture is designed to deliver outstanding performance and durability. It's built to withstand various outdoor conditions, ensuring long-lasting use. Whether you're lighting up a large building or a bridge, the Martin Exterior Wash 310 is the ideal choice.
