Martin 220 RGBW Color Mixing Exterior Wash Light - 7 Degree - US Version - Aluminum
Illuminate your mid-sized structures and building facades with the powerful, compact, and energy-efficient Martin Exterior Wash 220 RGBW Color Mixing Wash Light. Its sleek design is enhanced by an optional, discreet snoot. Enjoy easy operation with a built-in display, choose from a wide range of beam angles, and rest assured with its full IP-rating for permanent outdoor use.
This light is perfect for variable color temperature (2700K - 6500K) applications, thanks to its separate 2700K and 6500K LEDs.
Features:
- • High-power LEDs (2700K, 6500K) for bright illumination
- • Up to 9300 lumens at full white for maximum visibility
- • Six beam angle options to suit your lighting needs
Specifications:
- Physical:
- Length: 270 mm (10.7 in.)
- Width: 334 mm (13.2 in.)
- Height: 382 mm (15.1 in.)
- Weight: 13.0 kg (28.7 lbs.)
- Dynamic Effects:
- Intensity: 0 - 100%
- Color temperature control: 2700 K - 6500 K
- Control and Programming:
- Control systems: DMX, RDM
- Stand-alone control: Up to 20 scenes with global fade/hold times
- Setting, addressing, standalone programming: Control panel with OLED display
- DMX channels: 3
- Receiver: RS-485
- DMX compliance: USITT DMX512-A
- RDM compliance: ANSI/ESTA E1.20
- Firmware update: Serial upload via DMX link
- Optics:
- Light source: 2700 K and 6500 K LEDs
- Minimum LED lifetime: 50,000 hours (to >70% luminous output)
- LED manufacturer: Cree
- Beam Angle Options:
- No diffuser: 7.5¡«
- Narrow diffuser: 11.5¡«
- Medium diffuser: 25¡«
- Wide diffuser: 36¡«
- Very wide diffuser: 60¡«
- Asymmetric diffuser: 59¡« x 14.5¡«
- Binning: Tight color and flux binning
- Calibration: Full Gamut Color Calibration
- Photometric Data:
- CRI (Color Rendering Index) : > 70
- CCT: 6500 K (White LED)
- Total luminous output: 9300 lumens
- Construction:
- Housing: Cast aluminum
- Color: Light grey
- Ingress protection rating: IP66
- Surface treatment: Anodized and electrostatic powder-coated
- Effective Projected Area (EPA): 0.1 m2 including snoot
- Impact resistance: IK08 (with control panel display cover plate installed)
- Corrosion resistance: C5-M (very high corrosivity / marine, ISO 12944)
- Vibration resistance: 1.0g, Sinusoidal (IEC 60068-2-6), 0,7g RMS Random (IEC 60068-2-64)
- Installation:
- Mounting: Adjustable yoke
- Orientation: Any
- Minimum distance to illuminated surfaces: 0.2 m (0.6 ft.)
- Connections:
- Power connection: 1.8 m (5.9 ft.) cable tail without connector
- Power input cable type, EU models: H05RN-F 300/500V, 3 x 0.75 mm2, 7 mm
- Power input cable type, US models: SJOW 18AWG, 300V, WL F1, 8 mm
- Data connection: 1.8 m (5.9 ft.) open ended 5-conductor combined input + output cable tail
- All cable entries: IP68 cable gland
- Electrical:
- AC power: 100 - 240 / 277 V nominal, 50/60 Hz
- Power supply unit: Integrated, auto-sensing multi-voltage
- Power Consumption: 4 W (steady state, all LEDs at zero intensity)
- Typical half-cycle RMS inrush current: 10.3 A
- Maximum total power consumption: 185 W
- Surge protection: 4 KV
- Max earth leakage: 0.50 mA
- Typical Power and Current:
- 100 V, 60 Hz: 1.6 A, 162 W, PF 0.99
- 120 V, 60 Hz: 1.35 A, 160 W, PF 0.99
- 230 V, 50 Hz: 0.75 A, 160 W, PF 0.94
- 277 V, 60 Hz: 0.65 A, 160 W, PF 0.93
- Thermal:
- Cooling: Convection
- Maximum ambient temperature (Ta max.): 45¡« C (113¡« F)
- Minimum ambient temperature (Ta min.): -30¡« C (-22¡« F)
- Maximum surface temperature, steady state, at 40¡« C ambient: 55¡« C (131¡« F)
- Total heat dissipation (calculated, +/- 10%): 485 BTU/hr
The Martin Exterior Wash 220 RGBW Color Mixing Wash Light is perfect for lighting up mid-sized structures and building facades. It's great for lighting professionals and anyone looking to enhance outdoor spaces. Measuring 270 mm in length, 334 mm in width, and 382 mm in height, weighing 13.0 kg, it's compact yet powerful. With features like variable color temperature and multiple beam angle options, it offers versatile lighting solutions for any outdoor lighting project.
