Martin 200 RGBW Color Mixing Exterior Wash Light - 7 Degree - EU Version - Aluminum
Illuminate your mid-sized structures and building facades with the Martin Exterior Wash 200! This powerful, compact, and energy-efficient LED lighting fixture is a game-changer. • RGBW Color Mixing: Create stunning color combinations. • Six Beam Angle Options: Choose the perfect spread of light. • IP66 Rating: Built to withstand the elements.
Features:
- Powerful single color R,G,B,W LEDs
- Up to 6500 lumens at full white (RGBW)
- Six different beam angle options
- Internal power and control (DMX, RDM and OLED display)
- Rugged IP66 housing
- 0–100% intensity control
Specifications:
- Physical:
- Length: 270 mm (10.7 in.)
- Width: 334 mm (13.2 in.)
- Height: 382 mm (15.1 in.)
- Weight: 13.0 kg (28.7 lbs.)
- Dynamic Effects:
- Intensity: 0 - 100%
- Color mixing: RGBW
- Control and Programming:
- Control systems: DMX, RDM
- Stand-alone control: Up to 20 scenes with global fade/hold times
- Setting, addressing, standalone programming: Control panel with OLED display
- DMX channels: 3-5 depending on DMX mode
- Receiver: RS-485
- DMX compliance: USITT DMX512-A
- RDM compliance: ANSI/ESTA E1.20
- Firmware update: Serial upload via DMX link
- Optics:
- Light source: 16 x R, 18 x G, 16 x B, 18 x W single-color LEDs
- Minimum LED lifetime: 50,000 hours (to >70% luminous output)
- LED manufacturer: Cree
- Beam Angle Options:
- No diffuser: 7.5°
- Narrow diffuser: 11.5°
- Medium diffuser: 25°
- Wide diffuser: 36°
- Very wide diffuser: 60°
- Asymmetric diffuser: 59° x 14.5°
- Binning: Tight color and flux binning
- Calibration: Full Gamut Color Calibration
- Photometric Data:
- CRI (Color Rendering Index) : > 70
- CCT: 6500 K (White LED)
- Total luminous output: 6500 lumens
- Construction:
- Housing: Cast aluminum
- Color: Light grey
- Ingress protection rating: IP66
- Surface treatment: Anodized and electrostatic powder-coated
- Effective Projected Area (EPA): 0.1 m2 including snoot
- Impact resistance: IK08 (with control panel display cover plate installed)
- Corrosion resistance: C5-M (very high corrosivity / marine, ISO 12944)
- Vibration resistance: 1.0g, Sinusoidal (IEC 60068-2-6), 0,7g RMS Random (IEC 60068-2-64)
- Installation:
- Mounting: Adjustable yoke
- Orientation: Any
- Minimum distance to illuminated surfaces: 0.2 m (0.6 ft.)
- Connections:
- Power connection: 1.8 m (5.9 ft.) cable tail without connector
- Power input cable type, EU models: H05RN-F 300/500V, 3 x 0.75 mm2, 7 mm
- Power input cable type, US models: SJOW 18AWG, 300V, WL F1, 8 mm
- Data connection: 1.8 m (5.9 ft.) open ended 5-conductor combined input + output cable tail
- All cable entries: IP68 cable gland
- Electrical:
- AC power: 100 - 240 / 277 V nominal, 50/60 Hz
- Power supply unit: Integrated, auto-sensing multi-voltage
- Power Consumption: 3 W (steady state, all LEDs at zero intensity)
- Typical half-cycle RMS inrush current: 10.3 A
- Maximum total power consumption: 185 W
- Surge protection: 4 KV
- Max earth leakage: 0.50 mA
- Typical Power and Current:
- 100 V, 60 Hz: 1.6 A, 160 W, PF 0.99
- 120 V, 60 Hz: 1.35 A, 160 W, PF 0.99
- 230 V, 50 Hz: 0.75 A, 160 W, PF 0.94
- 277 V, 60 Hz: 0.65 A, 160 W, PF 0.89
- Thermal:
- Cooling: Convection
- Maximum ambient temperature (Ta max.): 45°C (113°F)
- Minimum ambient temperature (Ta min.): -30°C (-22°F)
- Maximum surface temperature, steady state, at 40°C ambient: 55°C (131°F)
- Total heat dissipation (calculated, +/- 10%): 485 BTU/hr
The Martin Exterior Wash 200 is perfect for illuminating mid-sized structures and building facades. Ideal for lighting professionals and architects. With a length of 270 mm, width of 334 mm, height of 382 mm, and weight of 13.0 kg, it's easy to install and use.
