ETC Selador Desire D40XTI Vivid LED Par - White

ETC Selador Desire D40XTI Vivid LED Par - Your Colorful Lighting Solution

Light up your world with the ETC Selador Desire D40XTI! This amazing fixture brings the power of the seven-color x7 system to your facility for permanent installation. Whether you need it inside or outside, its IP66 rating makes it ready for any location.

Why choose the D40XTI? Here are the top reasons:

• • Wide Color Range: The Selador x7 Color System offers a vast selection of spectrally-balanced saturated and tinted colors.
• • Rugged & Reliable: It features a rugged die-cast enclosure, noiseless fan-free operation, and multiple lens options that can be changed on site.
• • Easy Setup: You can easily set it up via any RDM device like ETC Gateways and Gadget.

Plus, it's perfect for high-intensity color mixing across the spectrum for wide color wash use.

Features:

• Easy setup via any RDM device such as ETC Gateways and Gadget
• 40 LED variable color-mixing light wash fixture (color mixing fixtures)
• 40 LED white-light wash fixture (static white fixtures)
• ETL listed to UL1598
• IP66-rated for exterior wet location use
• Data termination board for easy installation (included)

Specifications:

• General:
  • Easy setup via any RDM device such as ETC Gateways and Gadget
  • 40 LED variable color-mixing light wash fixture (color mixing fixtures)
  • 40 LED white-light wash fixture (static white fixtures)
  • ETL listed to UL1598
  • IP66-rated for exterior wet location use
  • Data termination board for easy installation (included)
• Physical:
  • Rugged die-cast all-metal housing
  • Accesory ring for installation of secondary lenses
  • Available in white
  • Hanging yoke standard.
  • Effective Projected Area (EPA): 0.74
• Electrical:
  • 100VAC to 240VAC 50/60 Hz universal power input
  • Waterproof, 39¡ì outdoor rated power lead
  • Up to 10 fixtures (15A max) may be fed on the same circuit
  • Requires power from a non-dim source
• LED:
  • 50,000 hour LED life (50,000 hours to 70% intensity)
  • 40 Luxeon Rebel LED emitters
  • Studio Daylight and Studio Tungsten use Rebel ES white light emitters for higher output
• Color:
  • Exclusive x7 Color System seven-color LED array
  • Broad spectrum color interacts seamlessly with conventional sources
  • Beautifully illuminates skin tones and other objects for natural appearance and high color rendering
  • Exclusive red-shift option emulates tungsten dimming performance (not available on static white fixtures)
  • Studio HD array uses warm and cool white light emitters with additional deep color emitters
  • Studio Tungsten and Studio Daylight provide good color rendering at very high brightness
• Optical:
  • Primary field angle of 17¡« and beam angle of 8¡«
  • Secondary lenses available for multiple beam spread options
  • Lenses must be ordered separately
  • Refer to accessories chart for lenses available
• Control:
  • DMX512 in and thru via termination board (included)
  • See DMX Control Table for operation modes
  • 15-bit virtual dimming engine provides smooth, high quality theatrical fades and minimizes color shift during dimming
  • RDM functionality for address and setting changes
• Thermal:
  • Ambient operating temperature of -4¡« to 104¡«F (-20¡« to 40¡«C)
  • Active electronic thermal management for droop-free operation
  • Noiseless, fan-free convection cooling for acoustically sensitive installations
  • Fixture is designed for continuous operation up to 104¡«F (40¡«C) ambient temperature and requires free flow of air around fixture housing

This ETC Selador Desire D40XTI Vivid LED Par is perfect for a variety of lighting needs. Whether you're a professional lighting designer for events, a venue owner looking to enhance the atmosphere, or a stage technician in a theater, it's a great choice. The fixture has a rugged die-cast all-metal housing with an accessory ring for secondary lenses. It's available in white and comes with a hanging yoke standard. The effective projected area (EPA) is 0.74. It can be used both inside and outside due to its IP66 rating. It operates on 100VAC to 240VAC 50/60 Hz universal power input with a waterproof 39-inch outdoor rated power lead. Up to 10 fixtures (15A max) can be on the same circuit and it requires power from a non-dim source.