ETC Selador Desire D40XTI Studio Tungsten LED Par - Silver
Bring the amazing control of the seven-color x7 system to your facility with ETC's Desire Series D40XTI. This fixture, with its IP66 rating, is perfect for both indoor and outdoor installations. The Selador x7 Color System offers a wide range of spectrally-balanced saturated and tinted color choices. The D40XTI features a rugged die-cast enclosure, noiseless fan-free operation, and multiple lens options that can be changed on site.
Studio Tungsten contains forty 3000K LEDs for high-intensity, non-variable warm-white output.
Key Features:
- • Easy setup via any RDM device like ETC Gateways and Gadget
- • 40 LED variable color-mixing light wash fixture (color mixing fixtures)
- • 40 LED white-light wash fixture (static white fixtures)
Technical Details:
- • ETL listed to UL1598
- • IP66-rated for exterior wet location use
- • Data termination board for easy installation (included)
Specifications:
- General:
- • Easy setup via any RDM device like ETC Gateways and Gadget
- • 40 LED variable color-mixing light wash fixture (color mixing fixtures)
- • 40 LED white-light wash fixture (static white fixtures)
- • ETL listed to UL1598
- • IP66-rated for exterior wet location use
- • Data termination board for easy installation (included)
- Physical:
- • Rugged die-cast all-metal housing
- • Accesory ring for installation of secondary lenses
- • Available in silver
- • Hanging yoke standard.
- • Effective Projected Area (EPA): 0.74
- Electrical:
- • 100VAC to 240VAC 50/60 Hz universal power input
- • Waterproof, 39” outdoor rated power lead
- • Up to 10 fixtures (15A max) may be fed on the same circuit
- • Requires power from a non-dim source
- LED:
- • 50,000 hour LED life (50,000 hours to 70% intensity)
- • 40 Luxeon Rebel LED emitters
- • Studio Daylight and Studio Tungsten use Rebel ES white light emitters for higher output
- Color:
- • Exclusive x7 Color System seven-color LED array
- • Broad spectrum color interacts seamlessly with conventional sources
- • Beautifully illuminates skin tones and other objects for natural appearance and high color rendering
- • Exclusive red-shift option emulates tungsten dimming performance (not available on static white fixtures)
- • Studio HD array uses warm and cool white light emitters with additional deep color emitters
- • Studio Tungsten and Studio Daylight provide good color rendering at very high brightness
- Optical:
- • Primary field angle of 17° and beam angle of 8°
- • Secondary lenses available for multiple beam spread options
- • Lenses must be ordered separately
- • Refer to accessories chart for lenses available
- Control:
- • DMX512 in and thru via termination board (included)
- • See DMX Control Table for operation modes
- • 15-bit virtual dimming engine provides smooth, high quality theatrical fades and minimizes color shift during dimming
- • RDM functionality for address and setting changes
- Thermal:
- • Ambient operating temperature of -4° to 104°F (-20° to 40°C)
- • Active electronic thermal management for droop-free operation
- • Noiseless, fan-free convection cooling for acoustically sensitive installations
- • Fixture is designed for continuous operation up to 104°F (40°C) ambient temperature and requires free flow of air around fixture housing
This ETC Selador Desire D40XTI Studio Tungsten LED Par - Silver is a great lighting solution for various facilities. It's perfect for both indoor and outdoor use. The fixture has a rugged die-cast enclosure and offers multiple lens options. It contains forty 3000K LEDs for high-intensity warm-white output. It's easy to set up via RDM devices. The fixture is ETL listed to UL1598 and IP66-rated for exterior wet locations. It comes with a data termination board for easy installation. It has a rugged all-metal housing, an accessory ring for secondary lenses, and is available in silver with a hanging yoke standard. Its effective projected area is 0.74. It has a universal power input of 100VAC to 240VAC 50/60 Hz, a waterproof 39” outdoor rated power lead, and can have up to 10 fixtures on one circuit. The LED life is 50,000 hours to 70% intensity, with 40 Luxeon Rebel LED emitters. It has an exclusive x7 Color System for great color rendering. It's suitable for lighting designers, event planners, and anyone looking for high-quality lighting. The primary field angle is 17° and beam angle is 8°, with secondary lenses available for different beam spreads. It has DMX512 control and RDM functionality, and operates in a temperature range of -4° to 104°F (-20° to 40°C) with noiseless fan-free convection cooling.
