ETC Selador Desire D40XT Studio Tungsten LED Par - Your Ultimate Lighting Solution
Light up your world with the ETC Desire Series D40XT Studio! This amazing lighting fixture combines the latest high-output white-light LED technology in a sealed IP66 outdoor-rated enclosure. It's perfect for video, film, and other white-light-only applications. • Ideal for location lighting due to its watertight build. • Choose from three different LED options for the perfect white light output. • Features a rugged die-cast enclosure, noiseless fanless cooling, multiple lens options, and an advanced user interface for easy configuration, especially for video and film pros. It can be set up for console control in studio systems or work stand-alone without a console.
D40XT Studio Tungsten – With forty 3000 K LEDs, it delivers high-intensity, non-variable warm-white light.
Specifications:
- Source:
- LED details: 40 Lumileds LUXEON Rebel LED
- Max lumens: Studio Tungsten: 5,023
- Lumens: Studio Tungsten: 52.8
- L70 rating (hours to 70% output): 50,000 hours
- Color:
- Colors used: Studio Tungsten: White
- Color temperature range: Studio Tungsten: 5600 K
- Calibrated array: Studio Tungsten: No
- Red shift: Yes
- Optical:
- Beam angle range: 8°–71°
- Aperture size: 7.5 in
- Pattern projection: No
- Pattern size: N/A
- Camera flicker control/Hz range: Yes: 900–25,000 Hz
- Notes:
- Secondary lenses available for multiple beam-spread options
- Sealed, factory-installed lenses available for permanent installations
- Control:
- Input method: DMX512 via watertight 5-pin XLR
- Protocols: DMX512/RDM
- Modes (footprint): See page 5
- RDM configuration: Yes
- UI type: LCD
- Local control: Yes
- Onboard presets: Yes
- Onboard sequences: Yes
- Onboard effects: No
- Fixture-to-fixture control: Yes
- Notes: 15-bit virtual dimming engine
- Electrical:
- Voltage range: 100–240 VAC 50/60 Hz
- Input method: Waterproof, 39 in power in and thru Requires power from non-dimmable source
- Inrush:
- 15 A at 120 V (First half-cycle)
- 40 A at 240 V (First half-cycle)
- Fixtures per circuit (Note: All measurements are for 120 V, 60 Hz. Results may vary in different regions.): 10 (15 A may be fed on same circuit)
- Wattage typical: 110
- Current draw: 1/0.5 A
- Thermal:
- Ambient operating temp: -20°–40° C (-4°–104° F)
- Fan (controllable): No
- Droop compensation: Yes
- dB range: N/A
- BTUs/hour: 375.32
- Physical:
- Materials: Die-cast, all metal housing
- Color options: Black
- IP rating: IP66 for exterior, wet location use
- Weight: 6.4 kg (14 lb)
- Included accessories: Hanging yoke, optional yoke/floor stand
- Warranty:
- Fixture: 5 years
- LED array: 10 years
- Regulatory and Compliance:
- Approved regulatory standards- :
- cETLus Listed
- Conforms to UL1598
- Certified to CSA C22.2 No. 250.0
- CE Compliant
The ETC Selador Desire D40XT Studio Tungsten LED Par is a great lighting solution for video, film, and other white-light-only applications. It's built to be used outdoors with its sealed IP66 rating. It's perfect for location lighting too. The fixture has a rugged die-cast enclosure, weighs 6.4 kg (14 lb), and comes with a hanging yoke and optional yoke/floor stand. It's suitable for video and film professionals who need high-quality lighting. It can be configured for console control in studio systems or work stand-alone. With three LED options, you can get the right white light output for your job. The D40XT Studio Tungsten has forty 3000 K LEDs for warm-white light. It offers a beam angle range of 8°–71°, an aperture size of 7.5 in, and multiple lens options. It's controlled via DMX512 through a watertight 5-pin XLR and has an LCD user interface. It operates in a voltage range of 100–240 VAC 50/60 Hz and has a wattage of 110. Its ambient operating temperature is -20°–40° C (-4°–104° F).
