ETC Desire D40 Lustr+ LED Par - Your Stage Lighting Dream
Light up your stage with the ETC Desire D40! This amazing fixture brings the seven-color x7 system into a round theatrical washlight. It's perfect for stage, studio, or any place where you need strong color and high-intensity lighting. • Wide Color Range: The x7 Color System offers a huge variety of spectrally-balanced saturated and tinted color choices. • Rugged & Reliable: Its rugged die-cast enclosure and noiseless fanfree operation make it durable. • Multiple Applications: With multiple lens options and an advanced user interface, it's great for various uses.
The D40 Lustr+ has an optimized array with six colors plus high-intensity white LEDs. It creates an ideal frontlight wash for full-range color, especially great for lighter colors and white. It lights skin tones beautifully.
PRODUCT SPECIFICATIONS
- Source
- LED details- 40 Lumileds LUXEON Rebel LED
- Max lumens- Lustr+: 2,593
- Lumens per watt- Lustr+: 25.2
- L70 rating (hours to 70% output)- 50,000 hours
- Color
- Colors used- Lustr+: Red, Amber, Green, Cyan, Blue, Indigo, White
- Color temperature range- 2,700–6,500 K
- Calibrated array- Yes
- Red shift- Yes
- Optical
- Beam angle range- 10°–71°
- Aperture size- 7.5 in
- Pattern projection- No
- Pattern size- N/A
- Camera flicker control/Hz range- Yes: 900–25,000 Hz
- Notes- *Secondary lenses available for multiple beam-spread options
- Control
- Input method- DMX512 via 5-pin XLR
- Protocols- DMX-512/RDM
- RDM configuration- Yes
- UI type- LCD
- Local control- Yes
- Onboard presets- Yes
- Onboard sequences- Yes
- Onboard effects- No
- Fixture-to-fixture control- Yes
- Notes- 15-bit virtual dimming engine
- Electrical
- Voltage range- 100–240 VAC 50/60 Hz
- Input method- Neutrik powerCON in and thru
- Inrush-
- 15 A at 120 V (First half-cycle)
- 40 A at 240 V (First half-cycle)
- Fixtures per circuit(All measurements are for 120 V, 60 Hz. Results may vary in different regions.)-
- 9 (15 A power thru connector)
- 10 (R20 module or similar)
- Wattage typical- 103
- Current draw-
- 0.82 A at 120 V
- 0.40 A at 240 V
- Thermal
- Ambient operating temp- -20°–40°C (-4°–104°F)
- Fan (controllable)- No (N/A)
- Droop compensation- Yes
- dB range- N/A
- BTUs/hour- 351
- Physical
- Materials- Die-cast, all metal housing
- Color options- Silver
- Mounting options- Yoke
- IP rating- IP20
- Weight- 6.4 kg (14 lb)
- Included accessories- Hanging yoke, 5 ft power cord, media holder
- Notes- Easy access slots for secondary lenses and standard 7.5 inch PAR accessories
- Warranty
- Fixture- 5 years
- LED array- 10 years
- Regulatory and Compliance
- Approved regulatory standards-
- UL 1573
- CSA C22.2 No. 166
- CE Compliant
- EAC Compliant
ETC uses a nationally recognized third-party lab for luminaire testing according to IES LM-84. See etcconnect.com/About/News/ETC-FixtureRatings-and-Warranties-Extended.aspx.
All LED sources experience some lessening of light output and some color shift over time. LED output will vary with thermal conditions. In individual situations, LEDs will be used for different durations and levels. This can eventually lead to minor alterations in color performance, necessitating slight adjustments to presets, cues or programs.
The ETC Desire D40 Lustr+ LED Par is a must-have for stage and studio lighting. It's great for lighting designers, event planners, and anyone who needs top-notch lighting. With a silver finish and a rugged die-cast enclosure, it looks great and is built to last. It weighs 6.4 kg (14 lb) and has a yoke mounting option. It can be used in a variety of settings, from small theaters to large concert venues. The wide color range and high-intensity lighting make it perfect for creating stunning visual effects.
